1 / 9
IKEA Skadis Regal für Nähmaschinen Garnrollen und mit Fadensicherungsclips — zdjęcie 1
1 / 9

IKEA Skadis Regal für Nähmaschinen Garnrollen und mit Fadensicherungsclips

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Ikea Skadis Regal mit 4 Schubladen für Nähmaschinen Garnrollen und mit Fadensicherungsclips

Ocena
0 / 5
Polubienia
2
Pobrania
3
Wydruki
0
Wyświetlenia
59
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Das ist ein Ikea Skadis Regal mit 4 Schubladen, für Nähmaschinengarnrollen und mit Fadensicherungsclips, damit der Faden sich nicht abrollt. Es passen 64 Garnrollen in die Einlagen. die Fadensicherungsclips werden einfach auf die Garnrollen gesteckt.

Gedruckt werden muss: 1 Schubladenhalter. 4 Schubladen. 4 Garnrolleneinlagen. 64 Garnrollenclips.

Ich habe alles mit PLA gedruckt. Außer die Clips. Diese am besten mit PETG Drucken. Damit sind die Clips elastisch beim raufstecken.

Infill bei PLA: Regal mit 40% gedruckt. Clips mir 40%. Regal, Schubladen, Garneinlagen mit 15%.

Regal mit Stützen bei den Haken für die Skadis Wand. Alles andere geht ohne Stützen. Die Clips am besten mit Brim.

Das Regal kann auch anderweitig verwendet werden.

This is a Skadis shelf unit featuring four drawers designed for sewing machine thread spools and thread-securing clips that prevent the thread from unspooling. The inserts hold 64 spools in total; the thread-securing clips simply snap onto the spools.

Required prints: 1 drawer housing, 4 drawers, 4 spool inserts, and 64 spool clips.

I printed everything using PLA, except for the clips. It is best to print the clips using PETG so they remain flexible when snapped onto the spools.

Infill settings: Print the housing at 40% and the clips at 40%. Print the drawers and spool inserts at 15%.

Use supports for the hooks that attach to the Skadis board; no supports are needed for the other parts. It is best to print the clips with a brim. The shelf can also be used for other purposes.

Tagi