Bracket Lenovo M720q 10G PCI-E NIC X710-DA2 Dual SFP+
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bracket for Intel NIC X710-DA2 by Dell for the Lenovo M720q.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 159
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- GNU General Public License v3.0
Bracket for Intel NIC X710-DA2 by Dell for the Lenovo M720q.
The bracket has:
Small slots for the LEDs are included.
Holes for M3-inserts.
Aditional holes for ventilation.
Recess for USB cable.
It is printed with the outside facing side downwards.
I printed it with suport for the insert hole facing outwards. It might be printable without.
Do NOT print with PLA when using a RJ45 to SFP+ module due to the heat generated by the RJ45/SFP+ module. Your bracket might melt. Print with a fillement that can witstand operating temperatures above 60 degrees celcius. The added GCODE for PLA is for fitting purpeses only.