Liczymy pasujące modele…
I updated my popular 10" rack mount for Lenovo ThinkCentre Tiny. It adds up to two standard keystone jack sockets, so you can bring Ethernet/USB/HDMI (or whatever keystone you like) to the front of your rack. I made some additional…
The front plate is pretty hard to get off without breaking it. Be prepared to use Glue, the fit is also pretty hard to get right. Might be worth looking at my other model which is just a vented lid, you need to tin-snip the top out of the…
I really liked Smelliot's version of the 10inch rack mount for Lenovo Tiny PCs, but the m900q's rubber feet are in a different position, so I remixed it and moved the feet channels to fit the m920q/m720q, and perhaps any other tiny's that…
This is a Remix of this So it now fits a 19" I needed 2 of this mount for a 19" side by side …. i have adapted the mounts from @Mauker, so you can also just print one side and use some of @Mauker Modular Rack Mount for the other side as…
It is very hard to print well because of all of the holes. It took my bambu p1s about 5 tries to get it right. It looks great and was very easy to install because of how ITG Gear designed it. I also used his front cover design and it…
Replaces the top cover of a Lenovo Mx20Q/X and provides fan opening for 120 or 140mm fans. It's not a total like for like, so you'll need to bond the front panel to the case as the supplied screw won't be enough to hold the panel on with…
The model allows you to quickly and easily pack the M720q mini computer into an enclosure to install it on a 10u rack.
This is a 3D model of the Thinkcentre M920. The 3D model from shuki on GrabCad https://grabcad.com/library/lenovo-2 was used as a reference and significantly modified to fit the M920 better. Fusion and STEP files included so you can…
ENG: Vertical stand for Lenovo USFF Tiny PCs. Works with M700q, M900q, M710q, M900q and presumably oder and newer variants like M720q and so on. As long as the PC is not thicker than 36mm. Made with Tinkercad. GER: Ständer für Lenovo USFF…
This is a very simple bracket to install a dual i226-v network card into a Lenovo M720q tiny. The bracket does not require any support, once printed, snap or cut off the part on the right, stick it through the protruding pins and weld in…
Print Settings 0.4mm 20% infill Support - Touching Build Plate Scale to 10% design is 10:1 to allow for detail. Can be printed with support and face down for quick/draft prints in under 1h, or with support face up for higher quality…
A new Remix of this nice mount https://www.printables.com/model/1040412-lenovo-thinkcentre-tiny-m720qm715qm920q-10-rack-mo They can now be assembled in the back too for more strength/support. The screw and hex connector's is adapted from…
Baffle for dual port 2.5GBit NIC for Lenovo M920q/M720q, in principle should work for other Lenovo-tiny series PC. Here is a link to the file created in onshape:…
Updated geometry to fit with a different graphics card. Inner mounting holes needed slight adjustment. I also shrinked the hole for the standoff screw just a tiny bit so you can use a heat press insert (M3). I also added a simple cover…
A new Remix of this nice mount https://www.printables.com/model/1040412-lenovo-thinkcentre-tiny-m720qm715qm920q-10-rack-mo They can now be assembled with more screws and hex nuts. + 2x keystone Print face down. Walls - 4 infill - 30 ore…
Bracket for the back plane of a M720q/M920q Lenovo ThinkCentre mini PC that has a NVIDIA T1000 graphics card fitted to it.
This is a cover for the Intel X520-DA2 on the M720q. It probably also works for the M920q but I don't have one. Here is the link for the OnShape
---> English Lab Rax - 10" - 1U - Lenovo M910q/M720q: Lenovo M910q 10" 1U Mount with 2 mounting screws. Edit (09,20,2025): Added support for the backside I'd be very happy to receive some feedback. :) ---> German Lab Rax - 10" - 1U -…
10 inch rack compatible mount for the Lenovo m720Q will (Likely) fit any M700 series Lenovo. Comes with Keystone mount for easy networking. Not recommended to be printed in PLA as the mount will split around the rack-ears. Higher infill…
24/08 V5 added. All now printed and fitting 26/08 V6 Rear added width guides. 26/08 Added Shelf Support. 2 M4x4x6 heated insert. 2 supports needed each side and something to bridge between to make a shelf.
Description This is a 1U mount for 10" mini racks. I made it so the mini PC slides in from the front as I preferred to install the mount and then add the PC. I found this also was easier for maintenance, all I have to do is push the back…
I modified it for a Lenovo M720q Tiny so that its rubber feet could fit through. And I increased its height to make it more stable when there are a lot of cables connected. Standard PLA printing is sufficient.
Custom Bracket for Yeston RTX 3050 Low profile card to fit Lenovo M720q. Allows for easy closing of top part of case. Printed in 100% infill PLA+ or can use PETG.
Bracket for Lenovo ThinkCentre M920Q M920 M720Q P330 Prueba de temperatura: Empieza con un valor bajo, como 220°C, y haz pruebas para encontrar el punto óptimo para tu equipo. La temperatura ideal del filamento PETG suele estar entre…
This is a baffle for the rear PCIe slot of Lenovo Tiny PCs including the M720q and others. The original baffle is from a user on Thingiverse by the name of simbaja and can be found here . I took the original model and tweaked it to my…
Use tin Snips to cut out the top of the lid and glue the overhang. I found a significant drop in CPU/GPU temp with the lid off vs on, having this vent should get the required result. The version you need for the Lenovo Mini is: 155x140
I took inspiration by glancing over the search results on printables with the search term “m720q” for 30 seconds and decided to do it myself, because I couldn't find exactly what I wanted. The most important feature to realise were the…
This is a remix of the bollio's original model on thingiverse . I have added some cutouts to improve airflow. The original auther stated that this baffle was for the Mellanox ConnectX-3 CX312A. But I have a CX322A, and it works just fine.…
I wanted to install a 40mm fan on my M920q to help cool the SFP+ Mellanox card I had laying around. So I modified the ITGear Top vented case design they uploaded to Printables. V1 Is as per my photo. V2 is slight adjusted and should have…
Steps to install whole setup into the Lenovo M720Q Minipc: Print this model with a sturdy material like PETG Take off side/top cover of minipc (screw on the back and slide towards front IO) Take out 2.5" drive holder by pressing down the…
Yeston updated there RTX 3050 LP model and flipped the HDMI and DPI ports. This is the updated version for the change.
Intro Designed to be printed face down. Holes included for airflow. Sturdy connections to card and case provided to ensure minimal risk of breaking during installation. No modifications to case required. Print Settings 0.6mm 10% infill No…
Please note - this bracket was designed specifically for the DELL version of the Mellanox ConnectX-4 NIC. Fits perfectly in the ThinkCentre M720q/920q/x, which is a common node in many home labs.
Print with outward facing/flat side down. Includes three holes for M3 threaded inserts to secure the bracket to the NIC and the case of the M720q. But it should also hold reasonably well without threaded inserts by securing the bracket…
m720q or m920x to hold a Mellanox ConnectX-3 CX312A / CX312C / CX322A
This model was inspired by this work. Except I wanted it to use the side rails of the rackfinity system as well as have it printable on a Prusa Mini. So I designed my own version that fulfills those requirements. The back piece contains…
After performing the https://github.com/badger707/m920q-dual-NVME mod on my M920Q, I needed a piece of plastic to retain the SSD. So I made this. Printing notes: These parts are very small, it's recommended to print both of them at the…
I made a little bracket to properly mount a dual SFP NIC inside my Lenovo Thinkcentre M720Q. Small slots for the LEDs are included. The model has holes for M3-inserts. It is printed with the outside facing side downwards.
Note: Please print the STL in the "Long Plug+Boot" folder to avoid issues with RJ45 Plugs being too long. The version you see in the pictures has a flaw i only noticed after taking said pictures: Ethernet cables with a maximum Plug + Boot…
I modified it for a Lenovo M720q Tiny so that its rubber feet could fit through and for a 100mm VESA mount. I also increased its height to make it more stable when lots of cables are connected. And you can clip it to a Ikea Skadis peg…
Lenovo ThinkCentre M920q / M920x / M720q — Vented Extended Cover with 120mm Fan Drop-in replacement for the standard side cover, adding a full-length single-slot PCIe card slot (up to 175mm) and a 120mm top-mounted cooling fan. Designed…
I had issues with the LSI 9200-8e card that I bought, so I ended up buying a new LSI 9300-8e. I modified the original design to accommodate for the different SAS connectors
2.5GbE M.2 A+E Key NIC Bracket for Lenovo Tiny M720q / M920q / M920x A simple mounting bracket that lets you add a 2.5GbE network card to your Lenovo Tiny (M720q, M920q, M920x series) using the M.2 A+E key slot normally occupied by the…
Mount to suit the M720q and Dell RX 6500 GPU - BazziteOS gaming here we come! If your interested in the vent for the case, its here: https://www.printables.com/model/1131947-mini-pc-lid-vent-rx6400-rx6500-lenovo-dell-hp-sff
Lenovo Tiny M720q IOCrest 2.5g plate
Based off of the original, this is a very simple bracket to install a dual i226-v network card into a Lenovo M720q tiny. The bracket does not require any support, once printed, snap or cut off the part on the right, stick it through the…
This is a blank for use with the " Lenovo Thinkcentre Tiny M720Q/M715Q/M920Q 19-inch Rack Mount" from @Mixmeister (a remix of a model from @timmi) - total credit to the creators. This is a removable blank that fits into the space where a…
This is a very simple bracket to install single port Mellanox Connectx-3 card into a Lenovo M720q tiny. The bracket does not require any support, once printed, snap or cut off the part on the right, stick it through the protruding pins…
Description This is a modified rackmount case for the Lenovo ThinkCentre M720q Tiny, adapted to fit the 10-inch Lab Rax rack system. The original model did not properly match the Lab Rax rack dimensions. I redesigned the left and right…
This is a simple 1U mount for a 19" rack, a ThinkCentre M720q and similar models, a JetKVM, two Ethernet plugs and four Compute Blades with rear fan. The system is held together by two M6*50 screws with matching nuts and a reinforcement…
Adaptation for Lenovo M720 or M920 for XWYWX X2R2115 version of Realtek RTL8125b dual 2.5 RJ45
Intel x520-DA2 10GB custom riser for Lenovo ThinkCenter M720q. I think the right retention hole may need to be moved a little. I saw a few others that exist but non that attached to the board itself and secured to the chassis.
Very simple bracket with two mounting position for internally mounting a 5010 blower fan.
Really simple design. I think it took me like 2 minutes to make. This replaces the little plastic piece that goes over the external mini WIFI antenna connector for the M710q and M720q Tiny. Prints quickly and no supports are needed. It is…
10GTek X520-DA1 bracket for Lenovo M720Q / M920Q (pcie riser needed), 3,5mm notch added for usb cable of 4010 blower fan if needed.
Made an baffle for the TP-Link TG-3468 to put it into a m720q tiny
Intel X540-T1 bracket for Lenovo M720q Printed with .20 layer high and 15% infill PETG
This is the non-USB model
It is very hard to print well because of all of the holes. It took my bambu p1s about 5 tries to get it right. It looks great and was very easy to install because of how ITG Gear designed it. I also used his front cover design and it…
---> English Lab Rax - 10" - 1U - Lenovo M910q/M720q: Lenovo M910q 10" 1U Mount with 2 mounting screws. Edit (09,20,2025): Added support for the backside I'd be very happy to receive some feedback. :) ---> German Lab Rax - 10" - 1U -…
m720q or m920x to hold a Mellanox ConnectX-3 CX312A / CX312C / CX322A
I made a little bracket to properly mount a dual SFP NIC inside my Lenovo Thinkcentre M720Q. Small slots for the LEDs are included. The model has holes for M3-inserts. It is printed with the outside facing side downwards.
Note: Please print the STL in the "Long Plug+Boot" folder to avoid issues with RJ45 Plugs being too long. The version you see in the pictures has a flaw i only noticed after taking said pictures: Ethernet cables with a maximum Plug + Boot…
Very simple bracket with two mounting position for internally mounting a 5010 blower fan.
Single NIC backplate to suit Intel Gigabit CT Desktop Adapter.
