N: Catenary pole base-AddOn for stackable piers

This is an AddOn to my universal, stackable Piers for Unitrack & Viaducts:
https://www.printables.com/model/1682724-universal-stackable-piers-for-unitrack-and-viaduct
to add catenary pole bases.

The bases are made for use with viaduct tracks or directly with Unitrack and each for three distances. KATO itself knows two different types of catenary pole bases for double tracks:

a) one for normal track and viaducts with a distance of 69mm from pole axis to pole axis or 18mm from centre of track to centre of pole, used for example with 23-060

b) one to use with new slab roadbed viaducts (like 20-401) with a distance of 83mm from pole axis to pole axis or 25mm from centre of track to centre of pole, used for example with 23-061

For my wider version of DIY-viaducts for Kato’s Unitrack we need another pole base of:

c) a distance of 73mm from pole axis to pole axis or 20mm from centre of track to centre of pole, that by obvious reason will go only with single track poles like 23-059

Hope you enjoy these extended possibilities to create viaducts and ramps with KATO’s great track system. Happy printing and a lot of fun with your model railway layout!

Please note:
KATO’s Unitrack is the first and only choice in n-scale for mobile layouts and one of the best track systems in general:
https://unitrack.katomodels.com/what_is_uni_track
But “Kato” and “Unitrack” are trademarks of K.K. Sekisui Kinzoku, Japan and are used for reference only. The design presented here is neither supported nor authorised by the before mentioned trademark holder.

Please note the license:
My design is published under the CC BY-NC-SA license, which means that you can freely use this model for any non-commercial purpose and may remix this model freely as long as you provide attribution and share with the same creative commons license. Feel free to contact me if any questions.