1 / 2
TapClip – Clip-On Kitchen Tap Towel Holder (23 mm) — zdjęcie 1
1 / 2

TapClip – Clip-On Kitchen Tap Towel Holder (23 mm)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Clip-on towel and dishcloth holder designed for 23 mm kitchen taps. No screws or drilling required.

Ocena
0 / 5
Polubienia
3
Pobrania
6
Wydruki
0
Wyświetlenia
38
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Public Domain

I designed this holder for 23 mm diameter kitchen taps to provide a simple place to hang small kitchen cloths near the sink.

It clips directly onto the tap using a two-part clamp, with no screws or drilling required.

Features

  • Designed for 23 mm diameter taps

  • Simple clip-on design

  • No screws or drilling required

  • Suitable for dishcloths and small kitchen towels

  • Removable and reusable

  • Simple multi-part design

  • Raised ends help prevent the cloth from sliding off

  • Can be resized or remixed for other tap diameters

Printing Recommendations

This model was successfully tested with PLA on a Creality K2 Pro.

  • Material: PLA — tested and working

  • Layer height: 0.20 mm

  • Nozzle: 0.4 mm

  • Infill: 15%

  • Infill pattern: Cubic

  • Internal solid infill: Monotonic

  • Infill/wall overlap: 30%

  • Supports: None, depending on print orientation

PETG should also work and may be preferable for additional flexibility and durability in a kitchen environment.

Fit note: Measure your tap before printing. This version is designed specifically for a 23 mm diameter tap.

Tagi