1 / 2
GA Trim Wheel Cover for Honeycomb Bravo — zdjęcie 1
1 / 2

GA Trim Wheel Cover for Honeycomb Bravo

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

An improved TPU general aviation trim wheel cover for the Honeycomb Bravo Throttle Quadrant.

Ocena
5 / 5
Polubienia
30
Pobrania
194
Wydruki
4
Wyświetlenia
1293
Oceny
4

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Video Games
Licencja
Creative Commons — Attribution — Noncommercial

This is a remix of eclair4151's trim wheel cover. I wanted one that didn't have any 90 degree overhangs on the knobby bits, and had a nice rounded feel on both sides. I also added a slight radius on the inside and a bit of a lip that helps hold it in place. It pops right on and stays put.

It should be printed with the larger flat surface on the print bed, no supports needed.

I'd recommend TPU filament, no idea if you'll be able to get this on with PLA or other rigid filaments.

Rafts
No

Supports
No

Resolution
.20

Infill
20

Filament material
TPU

 

Tagi