Pretzel Cable Clip — Two-Colour Desk Cable Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 58 x 44 mm pretzel-shaped desk clip for one small charging cable, with white salt accents. Flat print, no supports.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 15
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution
A small pretzel-shaped clip for keeping one charging cable in place on a desk. The printed example is shown in the photo. The slot is designed with a 3.6 mm entry and a 5 mm inner pocket for a cable around 3 mm thick. Check the fit with your actual cable before printing a batch.
Files
pretzel_bread.stl— orange or brown body, about 11.2 g PLA.pretzel_salt.stl— white accent, about 0.02 g PLA.
Import both STLs together as one object with multiple parts in Bambu Studio. Keep their original positions and assign a filament to each part. The white detail occupies only the top three 0.2 mm layers. For one colour, print only pretzel_bread.stl.
Print guide
PLA, 0.4 mm nozzle, 0.2 mm layer height, 3 walls, 15% infill.
Place the flat underside on the bed. No supports or brim.
Finished size is about 58 x 44 x 6.4 mm.
Push a small charging cable sideways through the bottom notch. Thin double-sided tape can hold the clip in place on a desk.
The photographed print confirms the appearance. Cable retention and fit have not yet been measured on a physical cable. Avoid cables whose insulation is pinched by the opening.