Spool Pin Bearing for Ender 3 v2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A pin bearing addition to the stock spool rack for the Ender 3 v2. All parts are printed, no need to purchase any…
- Ocena
- 4 / 5
- Polubienia
- 15
- Pobrania
- 57
- Wydruki
- 1
- Wyświetlenia
- 631
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
A pin bearing addition to the stock spool rack for the Ender 3 v2. All parts are printed, no need to purchase any bearings. The design removes friction between the rack and the spool. This will fit spools with an Inner Diameter of 2 3/4" or 70mm. The design includes a clip which stops the spool from falling off the end, you will need a rubber band for this.
The photos show the process for assembly. You need to build this around the stock Ender 3 spool rod, which captures the pins in place.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
Yes
Resolution:
0.16
Infill:
20% - 30%
Filament: Tecbears PLA Black
Notes:
I only needed to use supports for the Clips.stl which were a little difficult to remove, but possible with an craft knife, and the stock Ender 3 snippers. I printed with a .6mm Nozzle, a wall thickness of 1.2mm, and grid infill of 30% for the most of the files with the exception of the rollers at 20% infill. I had issues with the pegs on the cheeks snapping on the initial designs, but have successfully assembled and disassembled this version without anything snapping.
Category: 3D Printer Accessories