1 / 5
Xshot Break Barrel/Spinshot Extended Barrel Cover — zdjęcie 1
1 / 5

Xshot Break Barrel/Spinshot Extended Barrel Cover

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

No hardware extended barrel cover

Ocena
0 / 5
Polubienia
25
Pobrania
24
Wydruki
0
Wyświetlenia
385
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Outdoor Toys
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Update 9/23/26 : An updated version of the extended barrel threaded muzzle has been added to the files. Thank you to CJ Martin for bringing the issue to my attention! Faux suppressors with varying dimensions have also been added to account for different barrel lengths. 

Overview 

Similar to my Accessory Kit in that it doesn't require hardware, blaster modification or blaster disassembly. Available in two editions and a threaded cutout is included for customizing your own muzzle device. 

Extended Barrel Edition (EB)

This version is tailored to work with those who are using an extended barrel. The faux suppressor acts as a cover for your extended barrel and bcar. Should fit all major brand (Xshot/Dart Zone) bcars released in the last couple years. 

Cosmetic Edition (C)

Same overall appearance as the extended barrel edition but with no bcar cutout and a greater inner diameter for a clear passage of darts. Works best with the original front end dimensions. 

Printing Info

Models are oriented for multi-color printing (No AMS Required). If you don't care for multi-color, you may be able to rotate some pieces to forego support. Pins can be scale adjusted in your slicer if too tight or loose.

If you have any questions or need a model adjusted, please feel free to private message me here on printables!

Print Check List

  • 1 x Threaded Muzzle (your choice)

  • 1 x Faux Supressor (your choice) 

  • 1 x Muzzle Pin 

  • 1 x Lower Rail 

  • 2 x Lower Rail Pins

File Nomenclature

  • Support - Models marked with a (S) in the file name require support. Ex. BreakBarrel_(S)ThreadedMuzzleEB

  • Quantity - The quantity number for every piece can be found at the end of the file name. Ex. BreakBarrel_LowerRailPin2. Files not marked with a number should only be printed once. 

Filament

Find more Break Barrel Accessories Here!

Tagi