1 / 4
WoodPeckers StealthStop + DropZone tablesaw miter sled wall hanger - Locking Retainer — zdjęcie 1
1 / 4

WoodPeckers StealthStop + DropZone tablesaw miter sled wall hanger - Locking Retainer

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

WoodPeckers StealthStop w/DropZone hanger with ledger and positive spring-action locking retainer.

Ocena
0 / 5
Polubienia
1
Pobrania
1
Wydruki
0
Wyświetlenia
50
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial

This wall hanger stores a WoodPeckers StealthStop table saw sled, with or without the DropZone. The lower ledge supports the sled while a spring loaded retainer locks it in place. Pull and rotate the retainer to remove or reinstall the sled.

I printed the main body in 3D-Fuel Pro PCTG and the retainer in Creality Hyper PETG-CF, using 0.2 mm layers, 5 walls, and 25% gyroid infill.

Hardware: One 1/4"-20 UNC × 2-1/2" hex bolt, one 1/4"-20 UNC hex nut, one compression spring, and seven #10 × 3/4" pan head mounting screws.  My spring came from a hardware store assortment. It is approximately 9.6 mm OD, 18 mm long, with 0.8 mm wire. The exact spring is not critical; use one that slides freely over the bolt and provides light to moderate  compression.

Tagi