WoodPeckers StealthStop + DropZone tablesaw miter sled wall hanger - Locking Retainer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
WoodPeckers StealthStop w/DropZone hanger with ledger and positive spring-action locking retainer.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 1
- Makes
- 0
- Views
- 50
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
This wall hanger stores a WoodPeckers StealthStop table saw sled, with or without the DropZone. The lower ledge supports the sled while a spring loaded retainer locks it in place. Pull and rotate the retainer to remove or reinstall the sled.
I printed the main body in 3D-Fuel Pro PCTG and the retainer in Creality Hyper PETG-CF, using 0.2 mm layers, 5 walls, and 25% gyroid infill.
Hardware: One 1/4"-20 UNC × 2-1/2" hex bolt, one 1/4"-20 UNC hex nut, one compression spring, and seven #10 × 3/4" pan head mounting screws. My spring came from a hardware store assortment. It is approximately 9.6 mm OD, 18 mm long, with 0.8 mm wire. The exact spring is not critical; use one that slides freely over the bolt and provides light to moderate compression.