Counting matching models…
I created this utility primarily for cutting ceiling molding at 45° angle. ⛏ Print instructions ⬢ Material: Prusament PLA Galaxy Silver ⬢ Layer: 0.2 mm ⬢ Infill: 40% Grid - bottom (base), 15% Grid - top
Large mitre box for sawing precise angles with a hand saw. Can be used to cut boards up to 6" wide. Available angles are 0°, 22.5° and 45°, as well as one vertical 45° angle. Outside dimensions of the box: 298mm long (11.73") 177.8mm wide…
Mitre box for 25mm (3/4") outer diameter PVC pipes Print Settings Printer Brand: Creality Printer: CR-10 Rafts: Doesn't Matter Supports: No Resolution: 0.3 Infill: 20 Category: Tools
Small mitre box with a 1 inch / 26 millimeter channel for 45 and 90 degree cuts.
Zero Clearance insert for the R225 mitre saw from evolution power tools. It has a dust box on the bottom with an opening at one end. This prevents dust from falling out the underneath of the saw and encourages dust to be flung up from the…
Ryobi 900 Band Saw Mitre gauge. Never had one, so decided to make one. UPDATED 6/10/2017: Increased size of mitre base by 50%. Increased handle size by 50%. Corrected hole sizes for M3 bolts and nuts. I borrowed the angle marks from…
Miter / Mitre / Saw Box - 3 Sizes Same length of 240mm for all 3. Inside width of 22.5mm, 42,5mm and 64.5mm. If you fancy a different dimension, please let me know in the comments.
Layer height 0,2 Infill 15% Perimeters 2 Standard noozle 0,4mm Material PLA or PETG Supports NO
Mitre box to cut 2020 extrusion using hand hacksaw. Should be useful If you forgot to order a laser cutting service:) Guides should be done from steel cylinder with 6 mm diameter. Better hardened steel and it is possible to use metal…
Small redesign of ICant3DPrint exceptional Improved Mitre Cutting Box . The length is now suited to print on a 20x20cm bed like the Prusa Mk4's. This also decrease print time and filament usage. The model in the pictures is printed with a…
Print and connect your Kärcher vacuum directly to your Bosch mitre saw. I cannot guarantee it will work for your Bosch mitre saw or Kärcher vacuum but my setup is a Bosch GCM 8 SJL and a Kärcher WD3 Premium. Just print and try, hopefully…
See it in action here The Makita 1019L/1219L Mitre Saw Dust Collection Adapter is designed to seamlessly connect your Mitre Saw to a 2-1/2" flex hose, enhancing dust extraction efficiency and keeping your workspace cleaner. This adapter…
Can be easily scaled for other evolution saws Concentrates suction and improves dust collection
I made a riser block for my mitre saw to prevent long objects like baseboards from falling down after the cut or tilting and ruining the cut surface. Normally these types of saws have extendable side tables but mine ( Bosch PCM 8 )…
Saint Nicholas Mitre / Sinterklaas mijter 3D model voor sinterklaasfeest. The Saint Nicholas Mitre (mijter van Sinterklaas, Mitre de Saint-Nicolas, Mitra Świętego Mikołaja, Mitra Svatého Mikuláše, Szent Miklós püspöksüveg, Mitra di San…
The Design consists: a: Guidance with a tight fit. Please check the “TryOut.3mf”. In my case the fit gets tight with a left to right orientation (along the x-axis) and less tight along the y-axis. I needed to postprocess the printed…
A simple model to connect my Bosch Professional GCM 8 SJL sliding mitre saw to a 35mm shop vac nozzle. Print both STLs @ 0.20 and 30% infil is enough. No supports needed, the overhang lip may droop a tiny bit but it didnt affect…
Multiboard holder for a Carpenter's / Mitre square (universal). This holder uses Multiconnect connectors. 2 of them is sufficient. Multiconnect is much stronger than Multipoint. The connectors are tool-less and very easy to move. The…
42 mm internal diameter to 58 mm internal diameter vacuum attachment. Attach Dewalt DW715 Mitre Saw to 2.5" shop vacuum hose. Will work for other tools w/ 42 mm vacuum port.
Lady Dimitrescu Fan Art Statue – Gothic Vampire Lady Diorama This is a highly detailed fan art statue inspired by Lady Dimitrescu, designed as an elegant gothic vampire lady display piece. The model features a tall countess-style…
Print the drop-in support block out PETG (or any other plastic that will not bond to the plastic used for the main model) and insert before the upper surface starts printing. It should key in to the hex cutout as shown below. Print main…
Little tool with great effect. It's not anodised in red but PLA or PETG works fine. Dimensions: 182x38x25.4 mm
Miter/mitre inserts - one style for flat head bolts and the other for standard hex bolts. 18.7mm x 76.2mm / .75in x 3in
1. Introduction This simple adapter gives you the abbality to properly plug-in your Festool vacuum cleaner onto your Makita mitre saw. 2. Revision History Version Description Date A.1 Initial Release 15/01/2024 3. Printing Instructions…
Connects the vacuum port on a 10" Ryobi sliding mitre saw to the suction hose of a Dewalt shopvac hose for easy clean-up. Includes a 30° bend to keep the hose out of the way when using the saw. Print instructions Print standing up with at…
I designed this mitre box to cut the 32mm pipes required for another project - Filament Storage Solution (IKEA SAMLA) ( https://www.thingiverse.com/thing:743280 )
print facing up with supports. I did PETg 50% infill with 4 wall layers for extra strength.
June 8, 2026. I replaced v2 and 105 files with files labeled v3. The difference is that I added a strong chamfer to the leading lip or front edge. The problem with the earlier files was that the user had to carefully avoid contacting the…
As others have confirmed, the Evolution Mitre Saws have rubbish dust collection. This builds on others ideas for the saw cover, now to find - or design - something that goes behind the fence… I found that normal supports work better for…
Made some simple changes to make fit the 2020 V-Slot profiles
This stop block fits standard t-track with a 3/8 inch or 9mm gap, fitted flush to the workbench, rather than to a fence. For mitre saw stations where the fence is installed flush to the workbench rather than to a fence. The hole is…
Built for 1" (24.5mm) aluminum extrusions, but STEP files included for modifications. Hardware: M3 nuts [x4] M3 bolts 12mm [x4]
This is yet another mitre / miter box but with a unique difference! It is designed to hold and clamp 25mm x 11mm window fly screen frames to allow for easy accurate cutting of the required 45 degree angles. I designed it with two guided…
I printed this Miter Clamping Tool with Fuzzy Skin on the outside in Prusaslicer. This gives the clamping tool more friction on the surface of the wood. You could also glue a piece of sandpaper to the clamp to add more "sticktion". I…
A replacement blade guide pusher (german Führungsschieber) for an Ulmia Ott Mitre Saw, Type 352.
This lever (on off switch) broke and this is a replacement parts could fit others Metabo as well: KGS 216 KGS 216 M KGS 254 M KGSV 216 M KGS 305 M KGS 18 LTX 216 Printed in PLA with 6 walls, 6 top, 6 bottom layers in 0.4mm nozzle with…
Couldn't find a zero-clearance insert for the LS1019/LS1019L here so I made one. I've included the STEP files in case you want to make any changes to it yourself, up to you. I've modeled the rail supports as well, so it should hold up a…
I designed a Zero Clearance Mitre Saw Stop block. Using a digital reader, along with some aluminium bars and T-Track. Build video can be seen here:
My first model!! A new dust port to be able to connect a 50mm dust hose, at a 45 degree angel to the top port of the saw. This way the hose has a bit more freedom to move when the saw is turned.
Small little piece for perfect fit in the mitre slot of a Laguna Fusion F3 table saw. Might be useful to anyone who wants to print a feather board or such things. Designed to work with an M6 bolt.
Saw Guide for Wood Mitre Saw Blade The optimal method for boards thinner than 2 cm is shown in the photos (Appendices 1 and 2): Secure the board: Place the board in a vice. Attach the guide: Slide the saw guide over the saw blade.…
Simple guides to help with marking 55mm plaster cornice.
Simple mitre box for cutting 15mm trim/bead. Needed something to help make 45° cuts on some window beading.
Simple mitre box for cutting branches into cookies
The first model I made myself for my new printer, so be kind. Openscad files are included so you can adapt it for a different saw or fix any problems.
My Ryobi mitre saw stand (the silver edition on sale a few years back, not the current green one) lost one of the rubber feet. So, I made one real quick. Category: Replacement Parts
Made this to connect the bag adapter on a Dewalt Mitre Saw. Pop the bag off the adapter, slide this on and connect a 2.25" hose. Done.
Keep your workshop clear from dust and debris by attaching a variety of different dust bags / extraction systems to your mitre saws. It fits to hoses with 34mm inner diameter.
Handle on my mitresaw broke off, so I cleaned the break and designed and printed a replacement for it. Then I just epoxied it to the existing screw from the old handle. Print instructions Category: Parts
Replacement for Metabo Mitre Saw Guard Release Lever KGS 216 - all variants. Printed in PETG - use appropriate material. Use at own risk. Printed and tested for +months. No issues or wear.
Printed with Galaxy Black PETG Nozzle Temp: 230c Bed Temp: 85c 1st Layer, 90c higher layers PrusaSlicer 0.20mm SPEED settings - 4 perimeters, 15% infill Position - Knurled End Down No Supports
Model tested with : a Karcher WD3S (Vacuum) Fits all Karcher WD3/KWD3 models equipped with the “Suction hose with connection piece” as shown in the last picture above and a Makita LS0816F (Mitre Saw) Might fit with : LS1110F, LS0815FL,…
A truly minimal fret slotting mitre (miter) box. It's designed for making additional slots in already fretted instruments: ideal if you're too much into Angine de Poitrine, KGLW, Massive Audio Nerve and other microtonal stuff and want to…
Throat Plate Insert I made for the "AEG 10" Dual Bevel Slide Compound Miter Saw (Model PS254DB) The insert is split into two identical pieces to fit most print beds. Together, they form a perfect replacement for the stock throat plate,…
Makita LS Sliding Compound Mitre Saw ShopVac Vacuum Adapter 32mm ID /41mm OD ShopVac Vacuum Adapter to Makita LS Sliding Compound Mitre Saw Compatible Model: LS1219 LS1019 LS003GM102
Needed a guide to cut 16mm mini trunking So thought I'd add here. The one in the image is printed with a 0.6 nozzle, 0.4 layer height and in PETG.
Makita mitre saw model LS0815 (and I'm pretty sure the other models too) is is fitted with a dust collection bag. This is a comprimised solution - the lack of positive suction and small capacity means you'll soon be covered in dust. The…
A holder for Mitreapel CA Glue and CA Glue Activator Can. I also included the blender file so if you wanted to tweak the design you can as i was happy having the activator upside down with the cap on. otherwise my can does not fit. link…
Zero clearance inserts for Bosch PCM 8S sliding mitre saw. Inserts are intended to use only when saw is in vertical position, for other angles please use original inserts. For dimensions please see diagram, printer with table at least…
Zero clearance insert for the Mac Allister MMS210SL. I use the MitreWithSlot stl so I could then set the wall count to 5. When I then cut the slot using the saw it cut into the walls and didn't exposed any infill.
Remix miter insert, for compatibility with zero clearance module. After print just click it in! No glue needed. As a bonus, when the zero-clearance insert wears out, it can be easily replaced. you can use my remix (screw holes removed)…
Make your own lamp using a fallen branch! Lumitree is an adaptable lamp that clamps into your branch. You can make 2 models: 1 - LED Strip: Printed parts: 3x Branch Coupler(print-in-place) 1x Superior Base 1x Inferior Base 1x Joint A 1x…
Better dust extraction for the Makita DXT saw; these prints allow you to use two 32mmOD/28mmID hoses connected to a ShopVac. The elbow must be glued together (easier to print). The Hose to saw adapter is designed to be tight so you may…
These are templates designed to slide over tubing (square and rectangular profiles) and use to mark out square and 45 degree mitre cuts, mostly for making simple welded frames and such. They are designed for metric steel tubing,…
This sliding stop will make repetitive cuts a breeze. HOWEVER cutting any short timber on a sliding compound mitre saw requires care and comes with increased risks. Please ensure you are aware of the operational risks before attempting to…
Rear knob for Craftsman mitre saw. Modelled in Fusion360, Printed in PETG.
Mitre Box 15.6mm Makerbeam XL. Scaled down remix so I could cut the beams. About 1mm of play using the settings of the original model. The channels for cutting do come up tight, I had to widen them as I cut so could probably do with…
Designed for 9mm thick fly screen, but if you're using thicker frame scal it up vertically in the slicer. You want it to be 15mm taller in the slicer than the depth of the fly screen. (eg, if your fly screen is 16mm thick, scale it up to…
Ersatzteil für eine Gehrungssäge deren Hersteller ich allerdings nicht kenne. Die Säge selbst ist aus dem Baumarkt. Das auf dem Photo oben liegende Originalteil diente als Vorlage für ein mit Blender erzeugtes Modell welches dann…
This is a simple mount to attach a 250V 12A softstart modul KR-009 or the 16A ZLB to a Scheppach mitre saw HM90SL without making any permanent changes to the saw. Just unscrew one screw that holds the bladecover, add the mount and…
I am a model railroad enthusiast, which involves cutting a lot of plastic and wood profiles. These cuts often need to be made at precise angles. So I created this small miter box, adapted to the blades I use (0.6 mm thick). The miter box…
This is a battery holder spare part for the Milwaukee M18 SMS216 Mitre Saw. Mine broke, which is why I designed a replacement. It's printed in 2 parts - Place them sideways on the print bed. I printed with PLA+ for now. Might reprint in…
Used to hold cylindrical objects with a clamp or vice. Designed to be used with Michael Hornung's Miter Box Can hold up to 3 rods between 6-12mm diameter. You can choose to use 1 - 4 jaws to hold your work. 6mm rods will be too small to…
Camlock Vacuum Adapter for AEG/Ridgid Circular Saw or Mitre Saw. Should fit tightly with some PTFE tape.
Print with alignment guide on the top, I used tree supports and printed in ABS with 3 walls. I used M2.5 x 16mm, pretty sure M3 would work too.
This remix of Clifton McMorris' (@CliftonMcMor_1416112) model has several key improvements: Solid kerf cut area in the middle of the print provides a clean and dense area for the sawblade to cut the initial kerf Increased height (scaled…
Simple storage holder for CA glue on an HSW. I had some other variants with the side walls removed, but settled on this one since I only needed one. If you want to modify the file for yourself I'll include the .f3d that you can import…
Miter Box with quick clamping system. You just need a 8mm threaded shaft and some spacers to protect the straps. Feel free to share any comment, thanks! Demo: https://youtube.com/shorts/_bNxrlp7j60?feature=share Fully parametric model…
Turn your mitre/miter shears into a pipe cutter! Looks like it will fit the LÖWE brand but i'm not sure since mine are of a nameless brand, design looks to be the same. 5/8" (16mm) & 3/4" (19mm)
This prints with minimal supports, but they are required for the internal flange. I have bee using the part and it has been working perfectly for months. I printed the model in petg. It is possible this may fit other saws.
Replacement handle for mitre saw clamp, this style is rebranded by a lot of company's but seems to be the same. The inside mechanism is in 3 parts I only designed the handle part because I was able to reuse the original other 2 parts they…
I could not find a mitre box to fit the timber I needed for repairing our summerhouse. It was needed to cut notches at 45 degree angle. This is a 45 degrees slip-on mitre for 28mm timber. I printed it in PLA as it was not to be used for…
Accessories needed Carriage bolt M5, 30mm Washer Wing nut M5 Threaded rod M5 Threaded rod M10 - Benötigtes Zubehör M5 Schlossschraube, 30mm Unterlegscheibe Flügelmutter M5 M6 Gewindestange M10 Gewindestange
Back knob for Mastercraft 55-6802-6 Compound Mitre saw. Modelled in Fusion360, printed in PETG.
A small print to assist in maintaining the precise angle on a miter saw when cutting at an angle between the fixed presets. It should fit any of these saws for 550 blades, similar to Küpper Mitre Saw Perfect:…
The Black+Decker mitre box (BDHT20346) is a super useful tool but takes up a lot of space and isn't the easiest thing to store so I designed a holder with which you can hang them both on the wall. Yes, you could use a screw to hang it but…
Made this to fit my 10 inch Slider bosch mitre saw. possibly fits the 8.5. Needs at 20/23 mm led I used a 20mm 7w led cob led chip as it supper bright even in day light, then I found the 18v battery supply wires and connected it to with a…
Angle adjustment knob for a Delta 36-040 mitre saw. Knob located on the back of the tool. Modelled in Freecad, printed on an Ender-3 in PETG.
I have a terrible time making small straight cuts on my benchtop bandsaw so I made a really simple miter guide/gauge. Just print out the two pieces and glue them together. I used basic superglue and it's held up great so far for a couple…
This attachment is designed for Multiboard and holds a Mitreapel spray can activator along with a CA glue bottle. Note: I designed this from scratch after seeing a similar idea that was not made for Multiboard. I have not been able to…
This is a simple fence for the einhell mitre saw. Mine was bent so i created a quick replacement. Only one side, mirror piece for the other.
This is a remixed version of the original French Cleat Holder for the Wolfcraft 3D Mitre Square . I modified the model to be used as a simple wall mount — the French cleat system was removed , and I added two 3 mm mounting holes so you…
This is a mitre box specifically for cutting 90° corners with 12-14mm LED diffusers for when a using a corner profile. This arrangement produces some interesting cutting angles, so a mitre box is very useful for consistency. The box can…
This is a tool nholder for Starrett 505P-7 Mitre Protractor. Use it with 2x0 Flat Brackets from the DDD system to mount on your board. Insert the pin pieces between the sides and the tool holder. I also included files for the brackets…
They never come with a standard size... Suits Ryobi Wet & Dry Vacuum Vacuum Internal Diameter 35.50mm Mitre Saw Internal Diameter 38.30mm
Stayer SC 205 Mitre Saw Kappsäge Fix
Hi All! The lever lock for my Hercules Mitre Saw Stand broke off and I could not find a proper replacement. After calling Harbor Freight, they do not sell replacements. I tried lever locks made for Dewalt and other brands but they didn't…
A plug to fit into a stripped boss hole on a mitre saw blade guard, holds a M4 nut so the blade guard can be repaired instead of buying a entire new guard. The ribbed version is a tighter fit but does not allow spin and secures better,
Set of feet for Bosch PCM 8S Printed with TPU 6 walls, 35% infill 0.4 nozzle 0.2 layer height Here you'll find zero clearance inserts for this saw https://www.printables.com/model/1398947-bosch-pcm-8s-sliding-mitre-saw-zero-clearance-inse…
Replacement knob for locking the vertical position of the saw. Printed from PET-G, layer height 0,2 mm, perimeters 15, to proper stiffness. Glue the M10 nut into the socket with epoxy adhesive.
