1 / 3
The cover for the Levenhuk Travel 10x50 binoculars. — zdjęcie 1
1 / 3

The cover for the Levenhuk Travel 10x50 binoculars.

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

The prism compartment cover for the Levenhuk Travel 10x50 binoculars.

Ocena
0 / 5
Polubienia
0
Pobrania
1
Wydruki
0
Wyświetlenia
13
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Gadgets
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Over time, the original covers cracked and broke, and as a result, the alignment of the right tube relative to the prisms became disrupted — the image started to double. I didn’t realize this right away and wanted to adjust the prisms, but I managed to fix it by replacing the covers and tightening the tubes (objective tubes). I also restored the “sealing” of the compartment with the prisms by replacing the covers.

The model was created in AutoCAD 2018 – the DWG file is attached.

I printed the file “krishka Levenhuk Trave10x50.stl” on the KP3S as is, without changing the scale, using PETG plastic (nozzle 0.4 mm; layer thickness 0.2 mm; nozzle 220° С; bed 80° С) with standard Cura supports.On my copy of the binoculars, the lids fit tightly, without any play, and the holes for the screw and tube align without additional processing.

Tagi