The cover for the Levenhuk Travel 10x50 binoculars.
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.78 – €0.95 net (excluding VAT)
For file: KK_cover for Levenhuk Trave10x50.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.86 excluding VAT (range midpoint).
- Weight reported by the author
- 9 g
- Print time reported by the author
- 58.8 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
The prism compartment cover for the Levenhuk Travel 10x50 binoculars.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 1
- Makes
- 0
- Views
- 13
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Over time, the original covers cracked and broke, and as a result, the alignment of the right tube relative to the prisms became disrupted — the image started to double. I didn’t realize this right away and wanted to adjust the prisms, but I managed to fix it by replacing the covers and tightening the tubes (objective tubes). I also restored the “sealing” of the compartment with the prisms by replacing the covers.
The model was created in AutoCAD 2018 – the DWG file is attached.
I printed the file “krishka Levenhuk Trave10x50.stl” on the KP3S as is, without changing the scale, using PETG plastic (nozzle 0.4 mm; layer thickness 0.2 mm; nozzle 220° С; bed 80° С) with standard Cura supports.On my copy of the binoculars, the lids fit tightly, without any play, and the holes for the screw and tube align without additional processing.
