Sakura Japanese cherry blossom coasters - stackable
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Enjoy a cup of tea with these cherry blossom-inspired coasters.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 73
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- GNU General Public License v3.0
I made these cherry blossom-inspired coasters. The raised outer edge helps keep your cup in place, while the bottom rim allows the coasters to stack neatly when not in use.
I highly recommend using PETG for warm cups! PLA is fine for cold cups, but will deform with tea and coffee cups.
You can pause and add a color change at layer 26 (5.2 mm), for a different colored outer edge.
Print settings (included in the 3mf file if you use Prusa slicer):
Supports enabled (important). I used the default snug supports. They are easy to remove with your finger
0.2 mm layer height
15% gyroid infill
Top solid infill/top layer speed: 50 mm/s
The coasters are 6 mm thick and approximately 110 mm wide. They fit regular sized cups.