Assorted Strap Fasteners (PIP, NO SUPPORTS*)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
a large assortment of different type of strap fasteners/buckle/clasps/snaps for bag, belts, leads, ties, helmet, ect.
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 103
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
a large lot of different clasps, snaps, buckles, D-ring, hooks, adjusters, fasteners, ect. for just about any of your needs. should be able to scale for the most part. may run into some strength issues if you go too small. * all except 1 (L) of these can be printed without supports in the orientation provided. may have a little sagging but the parts will come out functional. adding supports would help with the sag for the buckle (A) the buckle with the D-ring can print without supports but it does deform due to sagging. its better if you add supports. its the only way you can had the d-ring print well is for it to be on its side.
i have tested all of them and all are functioning as intended. i test printed them all in PLA with no issues. i recommend you print 1 of them in something with better elasticity then PLA. PETG would work decent for printing the clasp (M) as it is under stress constantly so it does develop stress lines in PLA