Liczymy pasujące modele…
The goal was to create a buckle design that is durable and of course adapted to 3d printing. It often happens that the buckle (e.g. on a backpack) breaks when you step on it. I believe that these 3d printed buckles will last, since they…
Printing Parameters: Material: PETG Resolution: 0.2 mm Perimeters: 4 Supports: yes
These 8-shaped rings broke on my dress and I decided to print a replacement. Fits a 10mm wide strap. I modelled them with a flatter bottom for better bed adhesion. Use PETG or other plastic resistant to washing.
This is an UNFINISHED test of using an integrated spring to facilitate snappy buckle release.
Includes 2 widths, free end and loop end versions. 25mm fits 1in webbing found on most tactical gear, assault packs, main packs, plate carriers, etc. 30mm fits Vickers and similar slings. Also included is a Sling Adjuster Clip which seems…
The goal was to create a buckle design that is durable and of course adapted to 3d printing. It often happens that the buckle (e.g. on a backpack) breaks when you step on it. I believe that these 3d printed buckles will last, since they…
I present a system of multifunctional magnetic buckles. I often go to the mountains and camping and I don't like carrying too much equipment. I like it when it is multifunctional. We use a lot of buckles in tents and backpacks. An idea…
This might be overkill but, I made the walls of the buckle thicker by turning them into a bevel from the bottom of the buckle to the top of the wall. I have no Idea if any of those buckles ever broke this way, but I figured I'd make the…
Фиксаторы (Замыкатели) для жгутов Альфа и других эластичных резиновых или силиконовых жгутов. Есть базовая версия, версия с дополнительным кольцом для упрощения самопомощи для верхних конечностей, удлиненная версия и укороченная версия.…
These beads are designed for quick release buckles on water sports equipment such as a harness on a buoyancy aid or a dump valve on a BCD for SCUBA. You can adjust the beads buoyancy and add reinforcement by adding a 25mm m6 or m8 penny…
I redesigned the buckles of my old cat transport basket since one buckle was missing. You can see the original in grey on the right hand side, while the black is a printed one. I printed it with 0.2mm layer thickness in PLA activating…
A case for the LILYGO TTGO T4 development board (Q386 2.4in display version) https://lilygo.cc/products/t4?variant=42405660393653 The case has a buckle on each side for use with a nylon or elastic hand strap. It provides access to the…
For assembly use 4 original screws (button head self-tapping D2x5mm). Created with OnShape:…
idk what they are good for, i just use them for my projects and needed to upload them so that i can download it
I created in Tinkercad to use as the left forearm straps for my Rogue One Death Trooper build. I used double sided velcro and threaded the buckles on and strapped to the left forearm armor. I used HyperPLA and a heat gun to arc the…
Just the buckle for the side of the Death Trooper chest plate. I printed in silver PLA. Pretty simple and straightforward.
Includes 2 widths, free end and loop end versions. 25mm fits 1in webbing found on most tactical gear, assault packs, main packs, plate carriers, etc. 30mm fits Vickers and similar slings. Also included is a Sling Adjuster Clip which seems…
print settings used: 0.4 mm nozzle PETG 0.2 mm layer height 2 wall loops 15% gyroid infill normal snug orcaslicer supports needs to be pushed with some strength but it fits well
This is a remix of Timothy Prestero's NIH compliant face shield, from https://3dprint.nih.gov/discover/3dpx-013359 I added another fastener to the back of the shield frame to accommodate a strap that doesn't have the buttonholes. This…
Triple and quad buckles for the Micro Bungee TPU parts.
I had already printed several Prusa Face Shields and could not source any of the elastic strap material. I had some 3/4 Inch (19mm) Lightweight Polypropylene Webbing lying around so I designed these buckles to fit the RC3 Version of the…
I wanted to carry with me some EDC gadgets and tools but with a sort of quick release because I didn't want to open everytime the carabiner to get the tool I needed. I found and then remixed these small buckles from Survival Bracelet by…
Remixed Xacto blade keychain ready to use with CarabinerBuckles System I made to carry small EDC tools with any carabiner. To assemble it is the same as the original, you need 4x M3x4 countersunk screws to screw the cover on the body. If…
Remixed keychain Knife by k-eye ready to use with CarabinerBuckles quick release system I made to carry small EDC tools with any carabiner. The assembly it's pretty simple, however you can refer to the k-eye original video on vimeo Right…
Thanks to rorys3D for this incredible design. My overhangs are not great so I edited the model with built-in supports for ease of printing and support removal. 0.2mm layer height is recommended. Parts are oriented the right way. Snap the…
Final Fantasy XII Fang belt buckles & sash stencil I made for a friend.
Holder for Grip6 standard men buckles (1.5” straps). I tested the holder with the classic aluminum buckles (3 mm thick) and with the carbon fiber buckles (4 mm thick). I suggest printing upside down (with the openings facing down on the…
I made these for a friend of mine who makes a lot of great cosplay costumes - She needed some cosmetic buckles and was happy with the results. They print fast and can be finished however you like. They are not intended to have a lot of…
Made it to have a parametric 3D model for varying outdoor products. It snaps together, and releases nicely by pressing on the sides. This can be resized while maybe print in place will at some stage become questionable. Use ASA filament…
Decorative shoe buckles, meant to be attached to existing shoes to give them an 18th century aristocratic French Revolution vibe. Works well when attached to an elastic band worn around the shoe. You can also stitch them directly to the…
3D print a replacement backpack strap adjuster! I recommend printing from a strong filament such as ASA or nylon. There is a model file for a thin version and a (barely) thicker version. Both should be plenty strong for an average…
When you are building a touring car rc kit, there is always a step about building the turnbuckles. There are a lot of ways to assemble them, with a variety of existing tools on the markets. This tool has been created to make twice faster,…
I added holes and extended the locking arms on the build plate to improve printability.
NOTE: This is an add-on to the pre-existing "QUICK-CLIP : Base Starter Kit" Post-Processing Difficulty: Easy (Ready to Use from Printer) Tools Needed: None Introduction & Instructions: QUICK-CLIP is a versatile mounting system that I…
NOTE: This is an add-on to the pre-existing "QUICK-CLIP : Base Starter Kit" Post-Processing Difficulty: Easy (Ready to Use from Printer) Tools Needed: None Introduction & Instructions: QUICK-CLIP is a versatile mounting system that I…
There are two models, both have been tested on a resin printer, but should work fine for FDM printing.
My friend is currently working on an Andros cosplay from Power Rangers In Space and couldn't find the right buckles anywhere, so I just modeled them for her. THESE ARE NONFUNCTIONAL THEIR ONLY PURPOSE IS TO LOOK KIND OF COOL. I printed…
Male and female buckles compatible with the belt strap buckles on a DLX Twinpeak backpack. Useful if you broke one, or need an extension strap to make it fit. They also work fine with any 1.5" webbing straps. Print the female part…
I designed two belt buckles. They use the same mechanism but they look different, so you can choose the one you like most. One is for 23mm wide strap and the other 28mm. You can scale them a bit at the x-axis if your strap has different…
This is a remix based on the original QUICK-CLIP buckles. I tried to keep the models as close to the original dimensions. while opening them up to allow for 2" webbing/straps. While modeling this, I made it parametric and uploaded the…
This is just jimjimjimmyjim's mask but with the straps and buckles removed. Category: 3D Printing
Bunch of buckles and connectors I used for adding a shoulder holster to a mens' handbag.
Two types of molle buckles. I used them to remake a chest rig. Follow on Social Media @planmarks Website: https://planmarks.eu Support by PayPal https://www.paypal.com/donate/?hosted_button_id=EA4R2NXW5LM7E Support with ETH…
Fast Knot Rope Buckles - Adjustable Wind Rope Clips for Tents
Buckles are symmetric. After print fit and stick 2x5neodymium magnets. Watch out for polarity! Do not use as critical security (like a snap hook, for keys, expensive pendants).
I present a system of multifunctional magnetic buckles. I often go to the mountains and camping and I don't like carrying too much equipment. I like it when it is multifunctional. We use a lot of buckles in tents and backpacks. An idea…
