Full Case for the Ingcool 7IP-CAPLCD with Support for the Multifunction Arm mounting system by @RostaP
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is my custom Case for the Ingcool 7IP-CAPLCD with Support for the Multifunction Arm mounting system by @RostaP.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 28
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a Full Case for the Ingcool 7IP-CAPLCD with Support for the Multifunction Arm mounting system by @RostaP.
It was designed in TinkerCad by using the 3D Display model Ingcool provides for download.
It's very easy to assemble with some M3 bolts. The buttons are loose fit, so just remember to insert them before you slide in your 7IP-CAPLCD display and they'll gently contact the buttons for easy pressing -- though they have a loose fit they work great.
You may optionally print the Small Arm mount and attach it to the back-plate -- recommend applying some electrical tape over the top of the screws just in case for insulation against accidental metal to metal contact on those screws -- NOTE: USE AT YOUR OWN RISK 🤣 -- mine works great for what that's worth!
Then you can adapt it to the Multifunction Arm mounting system however you like . . .
I printed mine in PLA which has held up fine in my outside shop in South Louisiana Summer heat . . . but there should be enough margin/spacing in the sizing to work with most any filament or printer.
Original TinkerCad Design:
https://www.tinkercad.com/things/8oEqo62qVNk-ingcool-7ip-caplcd-case
The hardest part about using the Ingcool 7IP-CAPLCD touchscreen display is getting it up and running in KlipperScreen for which I've written a full blog walkthrough and shared here:
https://cajuncoding.com/2026-09-20-setup-klipperscreen-using-ingcool-7inch-lcd-touchscreen-7IP-CAPLCD/