LEGO Technic Compatible Motorcycle Wheel - TPU Tire
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
LEGO Technic compatible motorcycle wheel. I uploaded the .STL, .STEP, .3MF, and .F3D files so it can easily be modified.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 283
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution
LEGO Technic compatible custom motorcycle wheel. Prints in two parts, the rim and the tire. I added a lip on the tire and a groove in the rim so that they fit together securely. I included the .STL, .STEP, .3MF, and .F3D files so the model can be easily customized and modified. I also included the print files sliced for an Ender 3
The rim is 3 LEGO studs wide at the axle hole and 2 wide around the outer rim. The tire is 2 Lego studs wide. Together the outside diameter of wheel is 12.5 LEGO studs wide
Printer Settings:
I had the best luck using PETG for the rim and TPU for the tire to make it flexible and grippy.
Rim:
Filament: PETG
Layer Height: Whatever quality you want
Walls: 3-4
Top and Bottom Layers: 4
Infill: Doesn't matter much
Tire:
Filament: TPU
Layer Height: I used .2 MM
Walls: 3-4 depending on desired squishiness
Top and Bottom Layers: 4
Infill: 15-30% gyroid depending on desired squishiness
Note: while 3 Layers of TPU does work and makes a very soft tire, I recommend using 4 to avoid delamination, which I had problems with.