1 / 2
Case for ESP32-C5 XIAO Seeed w/ antenna and wall mount — zdjęcie 1
1 / 2

Case for ESP32-C5 XIAO Seeed w/ antenna and wall mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A slim case for the ESP32-C5 with external antenna. An optional wall mount provided too.

Ocena
0 / 5
Polubienia
3
Pobrania
41
Wydruki
0
Wyświetlenia
303
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Share Alike

Introduction

A slim compact case for the ESP32-C5 XIAO Seeed with external antenna.

It provides ample room to slot your ESP32-C5 in with an added lip/catch to keep it in place. If you need to remove the board at any time, a ~2mm hole in the back of the case lets you slide in a piece of filament or anything else to push it out.

Little ears/stalks help organise the antenna cable.

The lid is a combined slot-in type with a print-in-place flap.

I use these to run Biscuit for WDGWars.

Print Settings

This model deals with small details in order to keep the case compact.

As a result, it's best printed at a .10mm height.

2 perimeters. 

Any% in-fill.

PETG is recommended.

Tagi