Case for ESP32-C5 XIAO Seeed w/ antenna and wall mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A slim case for the ESP32-C5 with external antenna. An optional wall mount provided too.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 41
- Makes
- 0
- Views
- 303
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
Introduction
A slim compact case for the ESP32-C5 XIAO Seeed with external antenna.
It provides ample room to slot your ESP32-C5 in with an added lip/catch to keep it in place. If you need to remove the board at any time, a ~2mm hole in the back of the case lets you slide in a piece of filament or anything else to push it out.
Little ears/stalks help organise the antenna cable.
The lid is a combined slot-in type with a print-in-place flap.
I use these to run Biscuit for WDGWars.
Print Settings
This model deals with small details in order to keep the case compact.
As a result, it's best printed at a .10mm height.
2 perimeters.
Any% in-fill.
PETG is recommended.