Extension legs for IKEA Lack table (155mm)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Raises the IKEA Lack table by 155 mm
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 30
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- Creative Commons — Public Domain
I wanted to hide the wall outlet, so I created extension legs for my IKEA Lack tables..
The legs are tight fit. They have a solid face.
The total height is 175mm with 30mm insert hole for the original Lack leg, raising the table by 155mm.
I suggest you print "IKEA Lack extension leg sizing template.stl" to verify how it fits on your table leg. I created this file using Prusa slicer. If it is too tight or too loose, you can open the lock and adjust the X and Y size. Increase/decrease it by 0,1mm at a time. Once it is OK you can make the same X Y changes to file "IKEA Lack extension leg.stl" and/or "IKEA Lack extension leg.3mf".
The project was printed with my Prusa Mini+.
Supports: None
Fill density: 10% since nothing heavy will be put on the table
Fill pattern: Gyroid
Filament: fila3D matte Ivory PLA