1 / 9
The ASTRO Magnetic Magazine Pouch — zdjęcie 1
1 / 9

The ASTRO Magnetic Magazine Pouch

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A modular magnetic magazine pouch! Another one!

Ocena
0 / 5
Polubienia
6
Pobrania
15
Wydruki
0
Wyświetlenia
82
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Sports
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

OVERVIEW

ASTRO is my take on a modular magnetic magazine pouch. There are lots of them out there, but I designed this one to be customizable, easy to repair, and easy to adapt to different magazines.The separate parts can be printed in matching or contrasting colors (see the pictures), so you can build some really slick, personalized, and performant mag pouches.

ASTRO mounts using Tek-Lok Mini compatible attachments or my KlockLok connector. It uses common M4 and M2 hardware and the same 25–26 mm countersunk neodymium cup magnets used in my other magnetic pouches.

Right now it’s set up for Glock magazines. More bodies are coming.

WHAT’S IN THE FILES

  • All parts needed to assemble the pouch

  • KlockLok and Tek Mount Mini inner plates

  • KlockLok Backplate

  • Other KlockLok backplate sizes are available on my Printables page

BOM

  • 2 × 25–26 mm countersunk neodymium cup magnets (DIYMAG or equivalent)

  • M4 screws: 6, 8, 10 and 12 mm

  • M4 heat-set inserts: 2 and 6 mm

  • M2 screws: 4, 6 and 8 mm

  • M2 heat-set inserts: 3 and 4 mm

  • 1 × M4 nut for KlockLok or 4 × M4 nuts for Tek Mount Mini

  • Optional: sandpaper, butane torch and basic hand tools

PRINT SETTINGS

  • 0.4 mm nozzle

  • 0.20 mm layer height

  • 6 walls

  • 25–40% gyroid or cubic infill (I used 100%)

  • Snug supports

  • Brim optional

Orient the parts to minimize supports.

ASSEMBLY

  1. Print everything.

  2. Install the heat-set inserts.

  3. Install the magnets in the Backplate.

  4. Attach the Backplate to the Bottom.

  5. Attach both Sides to the Bottom and Backplate.

  6. Attach the Front to the Sides and Bottom.

  7. Install the bumpers and your preferred belt mount.

Heat-set insert locations:

  • Backplate — M4 × 6 mm on sides, M4 × 2 mm on bottom

  • Bottom — M2 × 4 mm on sides, M2 × 3 mm on front

  • Inner Side — M2 × 4 mm on front, M2 × 3 mm inside for bumper

  • Outer Side — same as Inner Side

  • Front — none

That’s it. Let me know how it works for you!

Tagi