The ASTRO Magnetic Magazine Pouch
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A modular magnetic magazine pouch! Another one!
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 13
- Makes
- 0
- Views
- 71
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Sports
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
OVERVIEW
ASTRO is my take on a modular magnetic magazine pouch. There are lots of them out there, but I designed this one to be customizable, easy to repair, and easy to adapt to different magazines.The separate parts can be printed in matching or contrasting colors (see the pictures), so you can build some really slick, personalized, and performant mag pouches.
ASTRO mounts using Tek-Lok Mini compatible attachments or my KlockLok connector. It uses common M4 and M2 hardware and the same 25–26 mm countersunk neodymium cup magnets used in my other magnetic pouches.
Right now it’s set up for Glock magazines. More bodies are coming.
WHAT’S IN THE FILES
All parts needed to assemble the pouch
KlockLok and Tek Mount Mini inner plates
KlockLok Backplate
Other KlockLok backplate sizes are available on my Printables page
BOM
2 × 25–26 mm countersunk neodymium cup magnets (DIYMAG or equivalent)
M4 screws: 6, 8, 10 and 12 mm
M4 heat-set inserts: 2 and 6 mm
M2 screws: 4, 6 and 8 mm
M2 heat-set inserts: 3 and 4 mm
1 × M4 nut for KlockLok or 4 × M4 nuts for Tek Mount Mini
Optional: sandpaper, butane torch and basic hand tools
PRINT SETTINGS
0.4 mm nozzle
0.20 mm layer height
6 walls
25–40% gyroid or cubic infill (I used 100%)
Snug supports
Brim optional
Orient the parts to minimize supports.
ASSEMBLY
Print everything.
Install the heat-set inserts.
Install the magnets in the Backplate.
Attach the Backplate to the Bottom.
Attach both Sides to the Bottom and Backplate.
Attach the Front to the Sides and Bottom.
Install the bumpers and your preferred belt mount.
Heat-set insert locations:
Backplate — M4 × 6 mm on sides, M4 × 2 mm on bottom
Bottom — M2 × 4 mm on sides, M2 × 3 mm on front
Inner Side — M2 × 4 mm on front, M2 × 3 mm inside for bumper
Outer Side — same as Inner Side
Front — none
That’s it. Let me know how it works for you!