Elegoo Mars Pro LCD Shim Spacer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This shim is designed to allow the use of the stock Mars LCD on the Mars Pro As the standard LCD Screen protector is a…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 226
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This shim is designed to allow the use of the stock Mars LCD on the Mars Pro
As the standard LCD Screen protector is a reported .018" thick while the Pro is .045" their standard screens will sit recessed by around 0.68mm.
This shim/spacer is 0.68mm and should result in the standard screens fitting flush in the Pro Model.
(this is a work in progress and has not been tested yet, and may need a slight tweak in the z high to account for transferring imperial to metric, and double-sided tape used so please let me know how you get on).
Update 16/07/2020:
Elegoo has told me the following.
Mars pro tempered film thickness 1.0mm
Mars tempered film thickness 0.48mm
So, I have added a 0.52mm spacer to fit their measurements, along with the larger user measured 0.68mm.
Will Confirm what one is right when I change out my Pro LCD, or if I get a comment confirming what size worked best.
Category: 3D Printer Parts