1 / 10
Adapter für 95 mm breite Spule an Prusa MK4; Adapter for 95 mm wide spool on Prusa MK4 — zdjęcie 1
1 / 10

Adapter für 95 mm breite Spule an Prusa MK4; Adapter for 95 mm wide spool on Prusa MK4

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Adapter für 95 mm breite Spule an Prusa MK4; Adapter for 95 mm wide spool on Prusa MK4

Ocena
0 / 5
Polubienia
4
Pobrania
17
Wydruki
0
Wyświetlenia
69
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

Ein Adapter für ein 95 mm breite Spule welche für den normalen Spulenhalter des Prusa MK4 zu breit ist und schief hängt. Der Adapter hat innen beidseitig eine Nut welche in das breite Endstück des Spulenhalters einrastet und die Spule gerade führt ohne daß diese abrutschen kann.

Den Teil mit Gewinde mit möglichst niedriger Layerhöhe drucken.
...................
An adapter for a 95 mm wide spool that is too wide for the standard Prusa MK4 spool holder, causing it to hang crookedly. The adapter features internal grooves on both sides that lock onto the wide end section of the spool holder, keeping the spool aligned and preventing it from slipping off.

Print the threaded part using the lowest possible layer height.

Tagi