Lens Cap (M72)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Lens cap for filter thread M72x0.75 mm. (with CoreOne and XL gcode)
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 15
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The provided gcode contains a dedicated, reduced support structure which is easier to remove and prevents damaging the filigree springs. (gcode for CoreOne and XL)
Because the material of the printed spring started to creep in a test over a couple of days, I uploaded another design. The models containing the word "Feder" utilize the spring from ballpoint pens. Just take the spring out of an old pen and press it into the center of the cap like in the foto with the green one.
Notice that there are two clamps you can print: one which require minimum 24mm long springs and another one for the shorter 18mm springs.
I'll upload more with different diameter in the future.
If you want a specific first, let me know (please provide thread size like in summary above).