Vented washer fluid funnel for Skoda Octavia
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Big-mouth vented funnel sized for the Octavia windscreen washer neck. Fills fast from a hose or bottle, no glugging.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 44
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A proper-sized vented funnel for topping up the windscreen washer on a Skoda Octavia (mine's a 2018). The stock funnels I tried were too small and glugged, so this one has a big mouth for filling from a hose, a water bottle or a petrol station jug.
How it fits
The spout is 34 mm tapering to 29 mm and 38 mm long, so it drops into the Octavia's 41 mm washer neck and the cone rests on the rim, about 6 mm above the filter mesh.
An exposed 6 mm vent channel runs from the spout tip to the rim, so the funnel can't seal on the neck and air gets out while it fills.
110 mm mouth with an 8 mm flange and a hanging tab so it can live on a hook in the garage.
Should suit any car with a similar size washer neck. The build script (build.py) is included if you want to resize it.
Print settings
Printer: Elegoo Centauri Carbon 2, 0.4 mm nozzle
Layer height: 0.2 mm
Supports: none, prints mouth down
Material: PLA is fine for water. PETG if it will live in a hot car or see screenwash concentrate a lot.
Filament: about 46 g
Time: about 1 h 20 min