1 / 4
Vented washer fluid funnel for Skoda Octavia — image 1
1 / 4

Vented washer fluid funnel for Skoda Octavia

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Big-mouth vented funnel sized for the Octavia windscreen washer neck. Fills fast from a hose or bottle, no glugging.

Rating
0 / 5
Likes
2
Downloads
9
Makes
0
Views
44
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution — Noncommercial — Share Alike

A proper-sized vented funnel for topping up the windscreen washer on a Skoda Octavia (mine's a 2018). The stock funnels I tried were too small and glugged, so this one has a big mouth for filling from a hose, a water bottle or a petrol station jug.

How it fits

  • The spout is 34 mm tapering to 29 mm and 38 mm long, so it drops into the Octavia's 41 mm washer neck and the cone rests on the rim, about 6 mm above the filter mesh.

  • An exposed 6 mm vent channel runs from the spout tip to the rim, so the funnel can't seal on the neck and air gets out while it fills.

  • 110 mm mouth with an 8 mm flange and a hanging tab so it can live on a hook in the garage.

  • Should suit any car with a similar size washer neck. The build script (build.py) is included if you want to resize it.

Print settings

  • Printer: Elegoo Centauri Carbon 2, 0.4 mm nozzle

  • Layer height: 0.2 mm

  • Supports: none, prints mouth down

  • Material: PLA is fine for water. PETG if it will live in a hot car or see screenwash concentrate a lot.

  • Filament: about 46 g

  • Time: about 1 h 20 min

Tags