Search results: windscreen

114 models

PrintablesLemsko

scale windscreen wipers

1/10 scale windscreen wipers for classic cars (60ies to 80ies)

Downloads: 970
Likes: 35
Rating: 4

Order a print of this model

Printablesthall72

Lego Compatible (27262.dat) Windscreen 6 x 4 x 1 Pentagonal with Handle

This model is compatible with the lego system.

Downloads: 158
Likes: 23
Rating: 0

Order a print of this model

Printables

Decorative windscreen holders for tax and insurance discs

Decorative windscreen-mounted holders for tax and insurance discs. I got tired of the terrible ugly standard vinyl holders, so made something a little nicer. These accommodate the standard (Ireland/UK) tax disc which is 75mm round, and…

Order a print of this model

Printables

Cell Phone Holder for Magnetic Holding Plate for Car-Windscreen-Mounting

Imagine you have a magnetic holder for your cell-phone in your car. Normally these use a thin ferromagnetic plate, which should be glued to the backside of your phone. But what should you do, if your phone supports inductive charging,…

Order a print of this model

Printables

Pajero Gen 2 - Windscreen Wiper Nut Cover

Windscreen wiper nut cover for Mitsubishi Pajero Gen 2 (V24). Printed with TPU.

Order a print of this model

Printables

CF MOTO 450MT / IBEX450 windscreen mechanism support

If you’ve installed a tall windscreen on your 450MT/IBEX and want to prevent any play in the windscreen adjustment mechanism — and your motorcycle is equipped with a 22mm navigation mount — I have a solution for you. Attached is a model…

Order a print of this model

Printables

Landrover Defender Windscreen Demister Vent with Side Window Vents

Windscreen demister with wider vent opening allowing for better air flow and outlets for side window demister vents. Also includes outlets that can be used for side windows. To connect output to side windows needs 20mm ID flexible pipe.…

Order a print of this model

Printables

Lego Compatible (57783.dat) Windscreen 3 x 4 x 1.333

This model is compatible with the lego system.

Order a print of this model

Printables

Volvo Windscreen Holder (1996-2005)

The front brackets that were meant to receive the pins on the rear windscreen of my 2003 C70 broke, so I modeled this part up. Print parts in a material with good heat resistance. Mine were ok in PETG, but higher temp filaments like ABS…

Order a print of this model

Printables

Lego Compatible (69564.dat) Windscreen 7 x 4 x 2 Canopy with Armor and Handle Pattern

This model is compatible with the lego system.

Order a print of this model

Printables

w638 vito spare part shifter windscreen trim clip

Order a print of this model

Printables

givi washer for windscreen moterbike

this is just he washer for a givi windscreen

Order a print of this model

Printables

Car windscreen wiper pusher

Problem Have you been driving on the highway and you windscreen wipers are bouncing on the windows. Or you want to use the wipes in rain, but then don't have good contact with the glass? Solution This jig pushes the car's windscreen wiper…

Order a print of this model

Printables

Polaroid Cube Windscreen Mount

A compact mount for attaching Polaroid Cube or Cube+ to windows or windscreens. The cube should simply push fit into the holder with the rubberised housing gripping securely in place. The holder has a notch to allow easy use of buttons…

Order a print of this model

Printables

Decorative windscreen holders for tax and insurance discs

Order a print of this model

Printables

Car Windscreen cleaner Fully 3D printed!

This is my fully printable Version of an Windscreen cleaning tool i wanted it to be fully printed on every FDM printer and as small as possible. Just put your desired towel on it :) I suggest printing it in PETG due to sun in a car. Only…

Order a print of this model

Printables

Case for SM57 with official pop filter/windscreen (A2WS)

While the pouch that comes with the Shure SM57 is more than enough to protect it (and much more importantly, anything it comes in contact with), the official A2WS windscreen/pop filter isn't nearly as robust. This case snaps on to protect…

Order a print of this model

Printables

Lego Compatible (62360.dat) Windscreen 3 x 6 x 1 Curved

This model is compatible with the lego system.

Order a print of this model

Printables

windscreen ice scraper

Supports: not needed Infill: 10% recommended Rafts: not needed Print material: any

Order a print of this model

Printables

PERNO TERGICRISTALLI FIAT 500 EPOCA F/L/R/G - WINDSCREEN WIPERS PIN FIAT 500 VINTAGE CARS F/L/R/G

IT PERNO TERGICRISTALLI FIAT 500 EPOCA F/L/R/G EN WINDSCREEN WIPER PIN FIAT 500 VINTAGE CARS F/L/R/G Especially Designed to it has just the right tolerance to screw perfectly between Nut and Body screw. I recommend to use PA - Nylon or…

Order a print of this model

Printables

Cell Phone Holder for Magnetic Holding Plate for Car-Windscreen-Mounting

Order a print of this model

Printables

Lego Compatible (45705.dat) Windscreen 10 x 6 x 2

This model is compatible with the lego system.

Order a print of this model

Printables

Lego Compatible (6070.dat) Windscreen 5 x 2 x 1.667

This model is compatible with the lego system.

Order a print of this model

Printables

Kawasaki Versys windscreen spacer

A simple "rubber" spacer for for Kawasaki Versys 650 (Mk1) windscreen. It is used to guide/seat the bolts through and to put something “soft” in between the windscreen and the bracket and the bolts. Best to be printed in something rather…

Order a print of this model

Printables

Lego Compatible (92279.dat) Windscreen 4 x 6 x 2 Round with Handle

This model is compatible with the lego system.

Order a print of this model

Printables

Pajero Gen 2 - Windscreen Wiper Nut Cover

Windscreen wiper nut cover for Mitsubishi Pajero Gen 2 (V24). Printed with TPU.

Order a print of this model

Printables

windscreen ice scraper

Supports: not needed Infill: 10% recommended Rafts: not needed Print material: any

Order a print of this model

Printables

Ford Transit Mk. 6 (2000-2006) Replacement Windscreen Cowl Screw Cap

This is a replacement screw cap for the windscreen cowl of a Mk. 6 Ford Transit van. I was going to be charged £16 for 4 and decided to model it myself. Each one takes less than a gram of filament and there are both flat and clip…

Order a print of this model

Printables

Windscreen plug Kawasaki Versys

Small plug to hold the windscreen cover in place. For the Kawasaki Versys.

Order a print of this model

Printables

CF MOTO 450MT / IBEX450 windscreen mechanism support

Order a print of this model

Printables

motorcycle windscreen alias cupolino

scrambler style motorcycle windshield

Order a print of this model

Printables

Xsara Picasso / cap for windscreen washer fluid tank

I've lost the windscreen washer fluid reservoir cap on my Xsara Picasso. Here's a replacement, to be printed in flex filament (eg TPU98)

Order a print of this model

Printables

Volvo 740 Windscreen Trim Clip (Pre Supported)

3D model description As close to original as possible volvo 740 windscreen clip. Three different models are included: one stock/original model made to be as close to the original as possible, one modified model made more flexible with…

Order a print of this model

Printables

BMW R1200RT K26 windscreen bump stop

A rough replacement for part number 46637681432 Can be just inserted from the top, clicks in place by buldging on the stem Print from the softest TPU you can find. I have printed it on the side with supports for stem part. I find it a bit…

Order a print of this model

Printables

BMW R1200RT Oilhead windscreen arm

2005-2013 Oil-cooled BMW R1200RT have a tendency to break a winshield arm due to metal fatigue in aluminum alloy upper windshield arms. This is a replacement one. Manufacturer PN 46637686677 and 46637686678 Inspired by blueprint by…

Order a print of this model

Printables

Windscreen washer tank

Printed for John Deer 3200. Sure it will work for others as well.

Order a print of this model

Printables

Windscreen washer fliud tank cap

the cap of the windscreen washer fliud tank has broke by the hinge. I removed the base part of the original cap and design a direct fit with no hinge. Printed with PETG-CF

Order a print of this model

Printables

Frost Buster windscreen scraper with TPU wiper blade

An 11 cm wide windscreen scraper with a TPU wiper blade insert ensures comfortable and quick removal of the first frost or wiping of fogged windows. Recommended print is from PETG or ABS and wiper blade from TPU filament. Infill 50% and…

Order a print of this model

Printables

Windscreen wiper Lid

lid replacement for subaru impreza wiper fluid bottle, also has nipple attachment for measuring fluid stick. I used TPU

Order a print of this model

Printables

Ford Focus (2011) Windscreen Wiper Fluid Reservoir Cap

I lost the cap for the windscreen wiper fluid reservoir of my Ford Focus 2011 Stationwagon, so I whipped up a new one to replace it. Probably best to print in PETG which is more resistant than PLA. Could potentially fit other reservoirs…

Order a print of this model

Printables

VW Golf - Polo - Passat AUDI A3 - A4 - A6 - Q3 -Q5 - TT Windscreen mirror wire protection - cover - cap 3C8857593B

EN VW Golf - Polo - Passat AUDI A3 - A4 - A6 - Q3 -Q5 - TT Windscreen mirror wire protection - cover - cap 3C8857593B The provided .Step file allow you to modify the length of your cover to perfect fit to your car, as your broken part is.…

Order a print of this model

Printables

Lego Compatible (6152a.dat) Windscreen 6 x 4 x 1.333 Airplane with Hollow Studs and Bottom Tabs

This model is compatible with the lego system.

Order a print of this model

Printables

Thumbscrew Replacement for Tenere 700 Adjustable Windscreen

Thumbscrew Replacement for Tenere 700 Adjustable Windscreen A direct replacement thumbscrew designed for my specific adjustable Ténéré 700 windscreen. Lost one of the original screws on the road and needed a new one. Type: Compatible with…

Order a print of this model

Printables

Lego Compatible (103918s02.dat) Windscreen 4 x 4 x 2 with Integral Glass - Frame

This model is compatible with the lego system.

Order a print of this model

Printables

Lego Compatible (103918s01.dat) Windscreen 4 x 4 x 2 with Integral Glass - Glass

This model is compatible with the lego system.

Order a print of this model

Printables

Windscreen Flag Holder for HGV/Van

Flag holder for two flags. Designed to be double sided taped to the windscreen, great for HGV/Vans or Cars. Printed using ASA+ for UV protection and heat resistance. 0.2mm Layer Height No Supports Print at current orientation.

Order a print of this model

Printables

Simple Ice Scrapers for your Windscreen

Simple Ice scraper - Tested in PLA, but you may have better results with a filament with a little bit of give to conform to the screen better. Wider version at 105mm for better coverage also uploaded

Order a print of this model

Printables

Lego Compatible (81911.dat) Windscreen 2 x 4 x 1 Curved

This model is compatible with the lego system.

Order a print of this model

Printables

Protective Shell/Case for SM57 microphone with A2WS windscreen

A protective shell for an A2WS windscreen on a Shure SM57 microphone (just like the US president has used since 1965!). It prevents the windscreen from being crushed and deformed in storage or transport. The groove in the handle part is…

Order a print of this model

Printables

CBR 1000 SC77 Windscreen rubbers

Printed with TPU 5% Infill and 0,15mm For easier fit in, just put some non agressive oil on it like "Ballistol"

Order a print of this model

Printables

Lego Compatible (21.dat) Windscreen 2 x 4 x 1 & 2/3

This model is compatible with the lego system.

Order a print of this model

Printables

Lego Compatible (7207.dat) Windscreen 4 x 8 x 1 Curved

This model is compatible with the lego system.

Order a print of this model

Printables

BYD Dolphin Surf Windscreen Washer Fluid Filter

FOR BYD DOLPHIN SURF - It is unknown whether this fits other BYD cars or other cars in general. This is for FILTERING any dirt or debris out of your WASHER FLUID. Thank you for your support!

Order a print of this model

Printables

Berlingo 2 windscreen washer cap - Bouchon lave-glace Berlingo 2

Berlingo 2 windscreen washer cap, you will just need a cerflex/rislan collar.

Order a print of this model

Printables

Landrover Defender Windscreen Demister Vent with Side Window Vents

Order a print of this model

Printables

lego compatible windscreen

i know that you can get insane with removing supports, but its an good model.

Order a print of this model

Printables

Lego Compatible (57783.dat) Windscreen 3 x 4 x 1.333

This model is compatible with the lego system.

Order a print of this model

Printables

Lego Compatible (92474.dat) Windscreen 6 x 2 x 2 with Handle

This model is compatible with the lego system.

Order a print of this model

Printables

Lego Compatible (65633.dat) Windscreen 6 x 6 x 1.333 Angled Curved

This model is compatible with the lego system.

Order a print of this model

Printables

Lego Compatible (3383.dat) Windscreen 6 x 6 x 1.333 Sloped

This model is compatible with the lego system.

Order a print of this model

Printables

Lego Compatible (21849.dat) Windscreen 8 x 4 x 2 with Handle and 2 Studs

This model is compatible with the lego system.

Order a print of this model

Printables

1290 Super Adventure R/S windscreen offset

Some simple adapters for the KTM 1290 Super Adventure R and S (2021+ tested) windscreen to make it tilt more forward on the top mounting points. As a taller super adventure owner the wind hits my helmet visor which is very loud, so i made…

Order a print of this model

Printables

Lego Compatible (98878.dat) Windscreen 10 x 4 x 2 with Handle

This model is compatible with the lego system.

Order a print of this model

Printables

Lego Compatible (62576.dat) Windscreen 5 x 8 x 2 with Rounded Bottom Corners

This model is compatible with the lego system.

Order a print of this model

Printables

Volvo Windscreen Holder (1996-2005)

Order a print of this model

Printables

Lego Compatible (69564.dat) Windscreen 7 x 4 x 2 Canopy with Armor and Handle Pattern

This model is compatible with the lego system.

Order a print of this model

Printables

Yamaha XSR900 Windscreen Mounts

Upgrade the fit and finish of your Yamaha XSR900 windscreen setup with this custom-designed mount kit, created specifically for the popular universal flyscreen linked below. Universal Motorcycle Windscreen on Amazon

Order a print of this model

Printables

CFMOTO 800MT-X Windscreen Buffeting Deflector

A small 3D printable wind deflector for the CFMOTO 800MT-X. This is designed to sit near the fork area and help reduce helmet buffeting without needing to fit a tall touring screen (not that any screen works to stop this) I am not a…

Order a print of this model

Printables

Yepp mini windscreen locking pin

Somehow, the retaining pin for the windscreen had gone missing. After taking a few measurements, I made this design. It seems to be sitting firmly in place.

Order a print of this model

Printables

Windscreen viper bolt cover - Outlander PHEV 2019

The little tabs that holds this down broke. Just made a replacement. Printed fine layers .12mm tilted about 80 degrees sideways to maximize strength for the small snaps that holds it in place. I used PETG.

Order a print of this model

Printables

Windscreen mount for Tascam DR-100 MkIII recorder

This is a design primitive for a windscreen for the built-in mics of a Tascam DR-100 MkIII field recorder. I never got around to designing the full cage to support the windscreen before I upgraded to a different recorder, but that should…

Order a print of this model

Printables

Windscreen Mount for Navman MiVue A20 Rear Dashcam

My friends forgot to remove their mount from the rear windscreen and needed a new one... Rather than paying $15 + shipping I just knocked this out, partially from memory. I've provided two models, one that sorta follows the lines of the…

Order a print of this model

Printables

Opel Insignia Windscreen Sprinkler Tank Cover

A car was missing plug/cover for windscreen sprinkler tank filler. Simple design, mant to be snap fit on the genuine filler. Might work for others GMC/Opel models. Internal diameter is 46 mm, internal height 10 mm. Print Settings Printer…

Order a print of this model

Printables

PUIG Windscreen Rod Holder

This is a replacement part for PUIG part number FIXVARLL-0-PR16. When I was installing my wife's brand new windshield on her Ryker I got a little carried away and over torqued the bolt, and shattered the original part. So out came the…

Order a print of this model

Printables

Cap for windscreen washer tank for a Volvo C70

So I designed and 3D printed one based on the original one I printed it with Fillamentum Flexifill TPU 98A using standard parameter of PrusaSlicer and 0.10mm layer height. As my previous print wasn't so nice (See…

Order a print of this model

Printables

Tamiya Sand Scorcher & Blitzer/Monster Beetle windscreen wiper

Didnt feel like painting the red wipers i got with my Monster Beetle shell so i designed and printed a pair in black instead. Useful as a spare part as the wipers are liable to get ripped off and lost in a rollover so i figured id put the…

Order a print of this model

Printables

NC700X Short Windscreen

As a tall rider I prefer no windscreen to have the least amount of buffeting. However the NC would look a bit strange with just the stock screen removed, and since none was available for the best commuter bike ever from (big H brand…

Order a print of this model

Printables

Window Cleaning Windscreen Wiper Squeegee

This is a holder for a windscreen wiper blade head. It accommodates those heads with approx 12.8 mm depth of metal. Such heads can be picked up cheaply, or you can use an old one after changing them on your car. I was dissatisfied with…

Order a print of this model

Printables

Windscreen clip peugot 307

The clip breaks very easy so I did draw a new one.

Order a print of this model

Printables

Windscreen Supports for Yamaha XSR900 / MT09

Supports for custom windshield / Windscreen (Adjustable angle) Motorcycle: Yamaha XSR900 or MT09 Walls: 3 Infill: 80% Material PETG or better Windscreen custom design, made with aluminum. requires 5mm Allen bolts, nuts & washers Print…

Order a print of this model

Printables

70-Mai dashcam mount forVW Transporter without rear view mirror on the windscreen

For my work I had to change to a new VW Transporter. The 70-mai dashcam was provided with just 1 static sticker to put on your windscreen. Unfortunately the sticker will work only once so I had no new sticker for my new Transporter.…

Order a print of this model

Printables

Car Windscreen Ice Scraper

A simple Ice Scraper for your windscreen. Model is created as a solid and then modified in the slicer to add a honeycombe through the handle. Print in PLA or whatever your preference is.

Order a print of this model

Printables

Windscreen wiper cover (rear) for Opel Corsa

Best material would be ASA because it can handle outside weather conditions well (especially sun light), but any material would also work. The hole on the inside could be used to inser set screw or flat head screw for final tweaking of…

Order a print of this model

Printables

Car's windscreen Ice Scraper

To remove ice from the car's windscreen

Order a print of this model

Printables

Tiger 800 windscreen mount

Got a used Triumph Tiger 800 2012 with a "Puig Touring Windscreen" and one of the windscreen mounts was broken. Because there is not too much force on the parts I decided to 3dprint them, I used extrudr Greentec Carbon Filament for that,…

Order a print of this model

Printables

ORTF Holder for Rode Blimp Windscreen

Holder for Sennheiser 8040 microphones (or ones of similar shapes) Uses 2-56 threaded inserts to allow an elastic shock absorber to support the microphones. Threaded inserts are part number 93365A110 from McMaster Carr. Category: Audio

Order a print of this model

Printables

Rode Blimp Windscreen Stereo Microphone Holder

These holders are for supporting the Rode M5 mics at a 110 degree angle to each other within the Rode Blimp 2 windscreen. A standard XLR connector will not fit on the back of these mics in this configuration, you have to get creative and…

Order a print of this model

Printables

Lego Compatible (3823.dat) Windscreen 2 x 4 x 2

This model is compatible with the lego system.

Order a print of this model

Printables

Lego Compatible (4284.dat) Windscreen 2 x 4 x 2 Inverted

This model is compatible with the lego system.

Order a print of this model

Printables

Toyota Yaris windscreen wiper endcap

A simple cover for windscreen wipers since the hail broke them. It could fit other makes, let me know it and share them!

Order a print of this model

Printables

Aston Martin Windscreen Scuttle Bung

This bung replaces rusty bung fitted in windscreen scuttle.

Order a print of this model

Printables

Volkswagen windscreen wiper U-HOOK 9x4

Missing part for car windshield wiper replacement. Simplified and working fine in VolksWagen Polo. This is EXPERIMENT - if you will download it let me know in comments how it was usable for you OK ? If you like it - please click ‘Like’ to…

Order a print of this model

Printables

Funnel for windscreen washer 2nd version

Second version od Funnel for windscreen washer for Fiat Grande Punto. Container diameter 31 mm. You can leave it connected to the car. This version is more rounded. First version here: https://www.thingiverse.com/thing:3524068 Category:…

Order a print of this model

Printables

Funnel for windscreen washer

Funnel for windscreen washer for Fiat Grande Punto. Container diameter 31 mm. You can leave it connected to the car. Print Settings Printer Brand: Prusa Printer: i3 MK3 Supports: Yes Infill: 15 Category: Automotive

Order a print of this model

Printables

Fiat 500 light and windscreen wiper button

Fiat 500 light and windscreen wiper button for above the original switches on the dashboard. Can be fitted with double sided tape or glue on the dashboard. The diameter is 15mm. The car is sold a few years back, so can't make a picture of…

Order a print of this model

Printables

Cap for Peugeot / Citroen reservoir windscreen washer

My neighbour lost his cap on his 106 peugeot. I design it and install it, works fine, clips good on tank The flange is too hard but you have to smooth it with a lighter. I design with an hole but dont see on print, too small so i drilled…

Order a print of this model

Printables

Windscreen Ice Scraper

The provided gcode files use Prusa Slicer infill density modifiers to provide more infill towards the scraping tip to make it stronger. The new version 2 model includes ripper teeth.

Order a print of this model

Printables

Windscreen scraper with integrated shield

A really simple print to fit pretty much any printer that will keep the ice off your hand while you clear your windscreen of ice. Orientated to print on it's side, which I think will be the strongest way to do it, but if you know you can…

Order a print of this model

Printables

Prusa Ergonomic Windscreen Ice Scraper

remove ice without removing gloves, ergonomic design for a comfortable grip and double face to scrape or break ice from car windscreen and more

Order a print of this model

Printables

Drapaczka, skrobak, scratcher, windscreen scraper

Skrobak do szyb. Drukuj obrys x4, wypełnienie kratka 50%, wartswa 0,2-0,25, brak podpór.

Order a print of this model