70-Mai dashcam mount forVW Transporter without rear view mirror on the windscreen
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
70-Mai dashcam mount forVW Transporter without rear view mirror on the windscreen
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 26
- Makes
- 0
- Views
- 527
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
For my work I had to change to a new VW Transporter. The 70-mai dashcam was provided with just 1 static sticker to put on your windscreen. Unfortunately the sticker will work only once so I had no new sticker for my new Transporter.
Luckily the Transporter I have, does not have a rear mirror on the windscreen but there is a black ‘dot’ glued to the window where the mirror would be mounted. The plastic cover hides a nice metal piece which can be attracted with a magnet.
So I created a new mount for my dashcam. This mount can be put on the windscreen with magnet power.
Printing advise: use a strong filament (PC-blend or Nylon) with 100% infill for the part which the dashcam is screwed on to because the 3 thin tabs could be too fragile otherwise.
No supports needed.
2 small M3 bolts and 2 M3 nuts needed to screw the parts together.
Magnet specifications:
Total outer diameter: 25mm
Total thickness without M5 thread: 7mm
Magnet diameter: 20mm
Thread: M5
Thread length: 9.7mm
The thread is not needed. I had this magnet laying around. You could also use a 25mm magnet instead or use a smaller magnet (as long as it is strong enough ofcourse) if you like but the middle printed part is created for 25mm by 7mm.