70-Mai dashcam mount forVW Transporter without rear view mirror on the windscreen
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
70-Mai dashcam mount forVW Transporter without rear view mirror on the windscreen
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 527
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
For my work I had to change to a new VW Transporter. The 70-mai dashcam was provided with just 1 static sticker to put on your windscreen. Unfortunately the sticker will work only once so I had no new sticker for my new Transporter.
Luckily the Transporter I have, does not have a rear mirror on the windscreen but there is a black ‘dot’ glued to the window where the mirror would be mounted. The plastic cover hides a nice metal piece which can be attracted with a magnet.
So I created a new mount for my dashcam. This mount can be put on the windscreen with magnet power.
Printing advise: use a strong filament (PC-blend or Nylon) with 100% infill for the part which the dashcam is screwed on to because the 3 thin tabs could be too fragile otherwise.
No supports needed.
2 small M3 bolts and 2 M3 nuts needed to screw the parts together.
Magnet specifications:
Total outer diameter: 25mm
Total thickness without M5 thread: 7mm
Magnet diameter: 20mm
Thread: M5
Thread length: 9.7mm
The thread is not needed. I had this magnet laying around. You could also use a 25mm magnet instead or use a smaller magnet (as long as it is strong enough ofcourse) if you like but the middle printed part is created for 25mm by 7mm.