1 / 3
Skådis (Skadis) Filament Cutter Holder — zdjęcie 1
1 / 3

Skådis (Skadis) Filament Cutter Holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A Filament Cutter holder for the Skådis (Skadis) peg board.

Ocena
0 / 5
Polubienia
6
Pobrania
5
Wydruki
0
Wyświetlenia
52
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution

I needed a place to store the cutter I’ve printed. The one I found wasn’t big enough. So I took the opertunity to learn some CAD in Fusion.

Dimensions: 18,5 d x 37 w x 44 h

The pocket is 20 mm high and the back wall is 4 mm thick.

How I printed it:

  • PLA

  • 20% infill

  • No brim

  • Support on buildplate only

  • 0.2 mm layer lines

  • 0.4 mm nozzle

I used 11,18 g of filament and it took 37 minutes to print.

The cutter I printed and use:

Tagi