Plug for ⌀1.75mm filament OD ⌀4mm PTFE Tube and PC4-M6 Connector.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A plug for ⌀1.75mm filament OD ⌀4mm PTFE Tube and PC4-M6 Connector.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 33
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
This plug is created for plugging the OD ⌀4mm PTFE tube and PC4-6M connector found on ⌀1.75mm filament dryboxes.
To use it, first use the plug to grip the ⌀1.75mm filament. Thereafter, insert the plug over the OD ⌀4mm PTFE tube or into the PC4-6M connector per your requirement. Its female end is for plugging OD ⌀4mm PTFE tube. It's male end is for plugging PC4-6M connector.
A plug holder is provided. You can use double-sided tape to stick it to your drybox.
Notes:
This plug can only grip ⌀1.75mm filament.
The grip is achieved by press fitting the filament onto the plug
In case you find the grip hole to be too small, use a needle-file to debur the grip hole.