Plug for ⌀1.75mm filament OD ⌀4mm PTFE Tube and PC4-M6 Connector.
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A plug for ⌀1.75mm filament OD ⌀4mm PTFE Tube and PC4-M6 Connector.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 8
- Makes
- 0
- Views
- 33
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
This plug is created for plugging the OD ⌀4mm PTFE tube and PC4-6M connector found on ⌀1.75mm filament dryboxes.
To use it, first use the plug to grip the ⌀1.75mm filament. Thereafter, insert the plug over the OD ⌀4mm PTFE tube or into the PC4-6M connector per your requirement. Its female end is for plugging OD ⌀4mm PTFE tube. It's male end is for plugging PC4-6M connector.
A plug holder is provided. You can use double-sided tape to stick it to your drybox.
Notes:
This plug can only grip ⌀1.75mm filament.
The grip is achieved by press fitting the filament onto the plug
In case you find the grip hole to be too small, use a needle-file to debur the grip hole.