Storage Box for 3 to 4 inch Polishing or Grinding Wheels
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a covered storage box for 3 to 4 inch buffing or grinding wheels that are up to 30mm in width.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 16
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a covered storage box for 3-to-4-inch buffing or grinding wheels that are up to 30mm in width. The cover fits closely. To make it slide easier, I lightly waxed the sides of the wheel storage tray with Renaissance wax. That’s pretty much my SOP for all closely fitted print parts to reduce friction. The lid is really pretty much optional. I tend to get a lot of debris on my workbench and find the cover helpful.
Print Settings
Printer Brand:
Bambu Lab
Printer:
Bambu P2S
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
20%
Filament: Creality PETG Red and Black but almost any material should work fine.
Notes:
Light coat of Renaissance wax applied to sides of storage tray to improve lid sliding over since lid is a close fit. Applying Renaissance microcrystalline wax to closely fitted lids and parts is my standard procedure. Try it, you may like it!
Category: Tool Holders & Boxes