1 / 5
Craftsman or Lasko Power Toolbox Handle — zdjęcie 1
1 / 5

Craftsman or Lasko Power Toolbox Handle

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Replacement handle and clamp block for Craftsman or Lasko Power Toolbox. Option for use as suitcase style handle.

Ocena
0 / 5
Polubienia
0
Pobrania
2
Wydruki
0
Wyświetlenia
10
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a replacement handle and mounting block for a Lasko branded Power Toolbox that I acquired. It was also sold by Sears under the Craftsman line and I own one of those so I had a reference for the parts.

If your top block is intact you may not need to print off a new one but I've included it since mine was broken and the handle was missing.

You will need M5x20 button head hex socket head capscrew c/w nut and washer for the top block attachment to toolbox lid.

I've included a hole in the hinge pin to screw in M4x20 button head hex socket head capscrew as reinforcement. The original handle did not have this feature.

As I was completing this project I realized that by designing a base block the handle assembly can be used as a universal suitcase style folding carry handle. In pairs it can be used for side handles.

I have not load tested these assemblies so use for light duty applications at your own risk.

Filament used: PETG

Print settings:

Top block: Orient top down. 6 walls, 15% infill, 4 top, 4 bottom, supports on build plate only.

Handle: Orient with stand-off nubs up. 5 walls, 15% infill, 4 top, 4 bottom, supports on build plate only.

Base block: Orient top facing up. 6 walls, 15% infill, 4 top, 4 bottom, no supports required.

Tagi