1 / 5
Craftsman or Lasko Power Toolbox Handle — image 1
1 / 5

Craftsman or Lasko Power Toolbox Handle

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Replacement handle and clamp block for Craftsman or Lasko Power Toolbox. Option for use as suitcase style handle.

Rating
0 / 5
Likes
0
Downloads
3
Makes
0
Views
11
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial — Share Alike

This is a replacement handle and mounting block for a Lasko branded Power Toolbox that I acquired. It was also sold by Sears under the Craftsman line and I own one of those so I had a reference for the parts.

If your top block is intact you may not need to print off a new one but I've included it since mine was broken and the handle was missing.

You will need M5x20 button head hex socket head capscrew c/w nut and washer for the top block attachment to toolbox lid.

I've included a hole in the hinge pin to screw in M4x20 button head hex socket head capscrew as reinforcement. The original handle did not have this feature.

As I was completing this project I realized that by designing a base block the handle assembly can be used as a universal suitcase style folding carry handle. In pairs it can be used for side handles.

I have not load tested these assemblies so use for light duty applications at your own risk.

Filament used: PETG

Print settings:

Top block: Orient top down. 6 walls, 15% infill, 4 top, 4 bottom, supports on build plate only.

Handle: Orient with stand-off nubs up. 5 walls, 15% infill, 4 top, 4 bottom, supports on build plate only.

Base block: Orient top facing up. 6 walls, 15% infill, 4 top, 4 bottom, no supports required.

Tags