Liczymy pasujące modele…
This model is best printed on its side or with the clip assembly at the top of the print. I advise against printing it flat, as when you insert it into the fan's foot slot it will split (unless you have adamantite layer adhesion lol).…
Replacement knob for Lasko box fan model 3733. May fit other fans or rotary switches as well. Switch post measures 6.5mm diameter with 2 flats 5.5mm across. Print instructions Category: Replacement Parts Summary Replacement knob for Lasko…
So I need some new feet for my Lasko box fans... who doesn't... those things break so easy it's criminal. In any case I looked on Thingiverse and there are several available but they all need lots of support. If I'm going to use extra…
A replacement for the knobs on the side that allow you to rotate the fan up and down. Threads are a snug fit, let me know if I need to loosen them up. Print instructions Material: PLA is probably fine. Settings: 0.4mm nozzle, 0.2mm layer…
Print settings shouldn't matter much. I printed with 2 perimeters, 0.2mm layer height and 25% infill. Supports are probably a good idea for the rear overhanging bit.
Modeled this replacement blade as the old one broke and made a really loud rattling noise. Printed in PETG and it works great now, if not a tiny bit flexible. This model is pretty tough to print so good support, retraction, and small…
I found a fan filter clip that WOULD work really well if it wasn't made for significantly larger filters than are on the market. I remixed it to support a wider range of filter sizes and be less fragile. It works GREAT in PETG. It's…
Replacement foot (normal size, and 1" extended version) for Lasko 20" box fan (from Walmart)... https://www.walmart.com/ip/Lasko-Cool-Colors-20-Box-Fan-with-3-Speeds-B20200-White/42388499?athbdg=L1200 You need to print it with supports in…
velkosť laskonky: 5 x 7 cm velkosť celej formy: 16 x 18 cm velkosť plechu na pečenie do ktorej sa vojde forma 4 krat: 34 x 37 cm Ak sa ti model páči klikni na srdiečko. Ďakujem. cake size: 5 x 7 cm size of the whole mold: 16 x 18 cm the…
Replacement foot for a Lasko 20" box fan.
(Imported from my models on Thingiverse: https://www.thingiverse.com/muchtall/designs ) This is made for the Lakso 18″ Remote Control Cyclone Pedestal Fan Model 1843, however it may work with other models. I suspect it works with any 18"…
Really, you shouldn't print this. Make it from cardboard or similar. I wanted to try and learn FreeCAD and use up some ancient filament, so figured “why not”. If you do want to print this, I'd suggest printing 4 with one side facing up…
This model converts a Lasko Power Plus model box fan to an air purifier. Lots of these types of fan filter conversions exist but they're all made for the basic Lasko/Cosco 20" box fan, which is quite a bit smaller all around than the…
EN - english This form simplifies the preparation of traditional double-layered coconut meringue desserts. Its precise design and uniform sizing make it perfect for baking elegant and professional-looking cookies. Features: Includes…
Replacement fan blades for Lasko 18in fan and similar models. Print fan hub using supports, only on build plate. x1 Print fan blades, orient flat on build plate. x4 Print both completely solid with any material. ABS OR PETG recommended.…
I've had this fan for a long time. In that time, the base had become worn out. It would no longer hold the fan vertical or secure. The mast would tip maybe five degrees, and would wobble around the vertical axis. I could also not pick the…
My Lasko model 2708 fan was knocked over and the plastic base broke. Instead of throwing it away, I designed a replacement base with a few modifications to make it more print friendly. The base reuses the original hardware. Add a stop or…
A funnel to make filling the Lasko 1128 Humidifier easier. The clip will keep the stopper open Print the clip vertically. If it's printed in a different orientation it may snap along the layer lines. The funnel requires supports
A simple feet mount for the IKEA Tillslag trestle and a Filter Box Fan From Lasko 4x 30xM4 4x M4 Washers
Someone I know had a Lasko fan knob that broke off, and someone recommended me to create an stl replacement
The plexiglass scoring / cutting tool sold at Lowe's hardware store come with a small piece of cellophane to protect the blade. The blade is quite sharp this sheath will protect you from the blade and the blade from you. No infill is…
Blížia sa vianoce a k tomu neodmysliteľne patria aj Laskonky. Krehké, sladké s orechovou alebo kokosovou príchuťou. Pochúťka pre malých aj veľkých. Po úspešnom vytlačení a poskladaní formy si priprav pečiaci papier v počte podľa toho…
This replacement power knob is designed for the Lasko Max Performance Pivoting Utility Fan and has been physically tested and confirmed to fit the following models: U15700 U15701 I designed this after the original knob on our fan broke…
Jednoduchá forma na laskonky
This model is a remix of Tad Theno's excellent replacement feet for a Lasko-type box fan. These feet by themselves are great . . . they plug in very solidly into the box fan chassis and are a great replacement for when you inevitably lose…
Replacement knob for my Lasko 754200 space heater which broke years ago. I feel this replacement is a bit better than the original as the power/speed control switch requires a bit of force and this knob offers a nicer grip. I printed mine…
Šablóna na laskonky Šablónu položte na plech vyložený papierom na pečenie . Stierkou naberte hmotu na laskonky a rozotrite cez šablónu. Formu na laskonky opatrne odklopte a máte pripravených 6 alebo 8 rovnako veľkých laskoniek. Rozmery…
Assumed at first this round button was a dial, it was definitely not and our cats love to come in and turn the heater on and off as they please. They seem to have not figured out how to remove it so far so I'm happy for now.
Hallo zusammen, ein nützliches Druckteil damit ein Glaskopf sicher steht. Angenehmes medizinieren ;) Viel Spaß beim drucken ;) Print Settings Printer: AM8 Rafts: No **Supports:** No Resolution: 0,2mm **Infill:** 15% Filament: - PLA -…
This model is a remix of Tad Theno's excellent replacement feet for a Lasko-type box fan. These feet by themselves are great . . . they plug in very solidly into the box fan chassis and are a great replacement for when you inevitably lose…
This was designed for the Lasko Xblower x12900. This is a Blower adapter with 2 3" vent duct openings. Its not a overly smooth and clean design and looks a lot like a lego brick but works for what I needed it to do. I was trying to find…
This is a replacement for the thin (and apparently fragile) lower mount for certain upright Lasko fans. It's thicker than the original and still allows the fan to swivel up. It uses all the original fan hardware.
The feet for my cheap walmart Lasko box fans keep breaking off. Simple solution- print new ones. The feet for my cheap walmart Lasko box fans keep breaking off. Simple solution- print new ones. I designed these in TinkerCAD, one of my…
Replacement knob for my Lasko 754200 space heater which broke years ago. I feel this replacement is a bit better than the original as the power/speed control switch requires a bit of force and this knob offers a nicer grip. I printed mine…
I extended the length of the original design to allow me to mount my MERV 11 filter and MERV 1 pre-filter to my box fan. Thanks to the original designer!
I wanted to print these feet on their sides in order to have a more favorable layer alignment, but the tapered ends required significant support. The modified files are straight on each side so that they sit flat on the print plate.
Used measurements rather than 3D model to re-engineer. Added clips and increased thickness of bottom strap for strength. Fits tightly. PETG is suggested for flexibility and durability. FreeCad file is included for anyone who wants to…
(USE IT AT YOUR OWN RISK) These are the STL and Fusion 360 files from my Fusion 360 Tutorial 007: Making a Lasko box fan blade with the surface workspace. Please watch my video if you want to learn how to make it in fusion 360 (USE IT AT…
See https://www.printables.com/model/34342-lasko-20-inch-wind-machine-fan-knob for most info. This remix has a flat bottom. My thinking is that printing with PETG on the textured sheet, the texture on the bottom provides plenty of…
This is an expanded base for the remarkably tippy Lasko CD09250 and Lasko 754200 ceramic space heaters. Probably works with other Lasko 9" high models, past present and future, they all seem to use the same injection molded case since at…
I needed a way to mount a small fan on the wall, securely, near a crib. I found some other models that work with this fan but the mount to poles. This is a new design that instead allows the fan to be wall mounted, leverages the original…
This will clip in to the square holes in a Lasko box fan, and possibly others.
Foot for my older Lasko fan that didn't come with feet. Utilizes the existing screw holes at the bottom of the fan's cover. You'll have to replace the existing screws with slightly longer ones. I don't know if this is compatible with…
Simple wall mounted holder for the remote control that came with the Lasko fan I just purchased. I used #6 screws to mount it to the wall. Here's the specific fan model:…
Replace a broken handle on a Lasko Box Fan (fan purchased in 2013). Wrap the cord around the handle for storage. Use the window hooks to keep the fan from falling out the window. Assemble with two M5/no. 10 screws.
Replacement handle for Lasko box fan. I recommend printing in the orientation shown in the picture. This ensures the small spring tab/latch will have good strength in the bending direction. Even so, I fear PLA and ABS/ASA may be too…
I began to wash my lasko fan and accidentally broke the leg, I began to design and in fusion 360 a replacement, the piece must be scaled down to 95% because it does not fit completely but it does keep the fan stable.
Printed with supports for the honeycomb insert.
Replacement foot (normal size, and 1" extended version) for Lasko 20" box fan (from Walmart)... https://www.walmart.com/ip/Lasko-Cool-Colors-20-Box-Fan-with-3-Speeds-B20200-White/42388499?athbdg=L1200
Remote holder for the rounded Lasko fan controller. Has nice beveled edges and some options for screwing in vs adhering to a surface. Dimensions The remote this was measured for is 51.25mm-58.25mm (curved, bottom to top) by 18.35mm (front…
My family has a Lasko S18924 pedestal fan that we got from Walmart ages ago. A constant lamentation each time one of us has to move the fan somewhere is that it doesn't have an easy to way to carry it! Enter this carry handle, which…
Basically as close as I could get to the original. my original foot never broke I just can't find it. I printed it upright with supports and it printed just fine on my Ender 3 V3 SE the supports were a bit difficult to remove however once…
I needed to make my fan taller so that it could blow cool air from the living room AC into my office. It's amazing how much of a difference the height made. I made this for a Lasko fan I got from Costco, but it should work with any…
My windowsill is too narrow to fit my Lasko Box Fan with it's standard feet. With no feet, the fan is unstable and would fall out of the window. These alternative feet feature a hook designed to go around the base of the window to secure…
