1 / 1
Carry Handle for Lasko S18924 18" Pedestal Fan — zdjęcie 1

Carry Handle for Lasko S18924 18" Pedestal Fan

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

It's a carry handle for your fan.

Ocena
0 / 5
Polubienia
5
Pobrania
24
Wydruki
0
Wyświetlenia
204
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

My family has a Lasko S18924 pedestal fan that we got from Walmart ages ago. A constant lamentation each time one of us has to move the fan somewhere is that it doesn't have an easy to way to carry it!

Enter this carry handle, which attaches to the fan's motor housing. To install, you will need to remove the housing from the motor, slide the handle onto the housing, then screw the housing back onto the fan.

A one-piece design that prints without supports and installs without fasteners or adhesives.

I designed this by tracing the housing with a pen onto a paper, scanning that as a PDF, then importing that tracing as a vector into Fusion360. Things might not be perfectly symmetrical as a result.

I printed mine in PETG:

  • 0.15mm layers (for maximum layer adhesion)
  • 6 perimeters with a 0.4mm nozzle for over-built strength. It is load-bearing, after all.
  • 30% gyroid infill

Alternative print settings to save time (0.4mm nozzle). It's probably good enough:

  • PETG or ABS (ABS elephant's foot may make it hard to install!)
  • 0.30mm layers
  • 4 perimeters
  • 15% gyroid infill

If you have a 0.6mm nozzle:

  • 0.4mm layers
  • 3 perimeters (0.72mm extrusion width)
  • 15% gyroid infill

 

STEP file included!

Tagi