Grew's MXL BCAR Remix (Fully Printed)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
MXL BCAR by Evan adapted for Dalardan's Grew, the Big Greg we have at home. Includes printed pins and bearings (opt.)
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 48
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remix. I will update credit when the original designer gets their files shared on here!
So this is the MXL BCAR from Evan's Big Greg MXL launcher but adapted to the Grew, @Dalardan's low hardware version. I added a piece of barrel instead of the original collet so it drops in to the Grew. Additionally, to keep in the spirit of "the Big Greg we have at home," I have modified and tested some printable pins and flanged bearings shared to me by Dalardan to fit this. You don't necessarily need to use them if you have or plan to get metal pins and bearings, but if you want as low hardware as possible, feel free to print them out.
In total, the 50 count version with 50 pins and bearings equals out to be around 140g of PLA and 5 hours and 45 minutes of print time (at least for me). I included a .3mf just to show how I printed mine, but obviously feel free to do your own setup. I included a 40 count version as I'm testing the printed against metal and only had 42 sets on hand, however Evan recommends as many as you can manage so if you can do the 50 count, please do for best results. I'll also update once my testing is complete.
Thank you and I hope you guys enjoy!