Print Flat Snap Together Mini Medicine Shelf
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mini Shelf that prints flat and snaps together. No supports or glue required! Sized to fit most medicine boxes.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 34
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
This is a modular, print flat mini shelf that prints without supports and snaps together, no glue needed. The shelf is sized to fit most common medicine boxes, though can be used for any small items.
Four different shelf heights are available, with optional dividers for internal height customisation. Optional vertical barriers can be used to reduce the depth of each layer of the shelf, making it easier to reach smaller items.
Shelf Dimensions
Height 1: 54mm
Height 2: 106mm
Height 3: 158mm
Height 4: 210mm
Inside width: 72mm
Inside depth: 124mm
Layer height (space between dividers): 24mm
Required Parts
All shelves required 2 base panels, two side panels and a back panel. The base panels are the same for all sizes and are in the common parts folder. The side and back panels are sorted into folders by size.
Divider and barrier panels are optional parts that can be used to customise the height of each section of the shelf. The divider panels clip into the slots on the side and back panels, and the barrier panels clip into the base and divider panels. These panels are common and will fit any of the four shelf heights.
Assembly
The parts of the shelf snap together without needing to be glued. For easiest assembly connect in the following order:
Barriers to divider shelves
Divider shelves (and barriers) to a side panel
Other side panel
Back panel
Top and bottom panels