Coat hanger for square/rectangular railings (PARAMETRIC)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adjustable, rectangluar clip to hang coats or vests to a square railing.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 11
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Open Community License v1.1
I designed a coat hanger for a square railing. It has adjustable side measurements as well as a customizable length of the stick. There is another one for a rectangular railing.
You can clip it on a rectangular rail and hang your coats, jackets, vests etc. on it!
Print it with more walls and infill than usual, otherwise it's prone to breaking. I use 3 walls and 40% infill.
Parameters in the square_hanger.fcstd file are:
Parameter | default | changes |
|---|---|---|
square_sides | 41mm | The inner dimension of the square. |
wall_width | 4,5mm | The width of the wall of the squares. |
square_height | 20mm | Height of the square walls (lying on the side). |
cylinder_length | 50mm | The length of the stick for hanging stuff. |
cylinder_radius | 5mm | The radius of the stick. Don't make it larger than (square_height-4mm)! Otherwise the cylinder plus chamfer would protrude over the square. |
knob_thickness | 4,67mm | The thickness of the end knob. |
cylinder_center_offset | =knob_radius | Distance the cylinder center is offset from the top of the square. Knob_radius makes the knob flush with the top. |
knob_radius | =cylinder_radius * 2 | The radius of the knob. |
opening_width | =square_sides - opening_offset_knobside * 3 | The width of the opening for clipping. Makes the protrusion larger on the non-knob side for more stability with weight. |
opening_offset_knobside | 6mm | How much the opening is offset from the knob side. Larger makes the opening smaller. |
And for the rectangular_hanger.fcstd:
Parameter | default | changes |
|---|---|---|
side_depth | 66mm | The inner dimension for the "upper" and "lower" sides of the square. |
side_height | 14mm | The inner dimenstion for the "front" and "back" sides of the square. |
wall_width | 4,5mm | The width of the wall of the squares. |
square_height | 20mm | Height of the square walls (lying on it's side. |
cylinder_length | 50mm | The length of the stick for hanging stuff |
cylinder_radius | 5mm | The radius of the stick. Don't make it larger than (square_height-4mm)! Otherwise the cylinder plus chamfer qould protrude over the square. |
knob_thickness | 4,67mm | The thickness of the end knob. |
cylinder_center_offset | =knob_radius | Distance the cylinder center is offset from the top of the square. Knob_radius makes the knob flush with the top. |
knob_radius | =cylinder_radius * 2 | The radius of the knob. |
opening_width | =square_sides - opening_offset_knobside * 3 | The width of the opening for clipping. Makes the protrusion larger on the non-knob side for more stability with weight. |
opening_offset_knobside | 6mm | How much the opening is offset from the knob side. |