Coat hanger for square/rectangular railings (PARAMETRIC)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adjustable, rectangluar clip to hang coats or vests to a square railing.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 1
- Makes
- 0
- Views
- 11
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Open Community License v1.1
I designed a coat hanger for a square railing. It has adjustable side measurements as well as a customizable length of the stick. There is another one for a rectangular railing.
You can clip it on a rectangular rail and hang your coats, jackets, vests etc. on it!
Print it with more walls and infill than usual, otherwise it's prone to breaking. I use 3 walls and 40% infill.
Parameters in the square_hanger.fcstd file are:
Parameter | default | changes |
|---|---|---|
square_sides | 41mm | The inner dimension of the square. |
wall_width | 4,5mm | The width of the wall of the squares. |
square_height | 20mm | Height of the square walls (lying on the side). |
cylinder_length | 50mm | The length of the stick for hanging stuff. |
cylinder_radius | 5mm | The radius of the stick. Don't make it larger than (square_height-4mm)! Otherwise the cylinder plus chamfer would protrude over the square. |
knob_thickness | 4,67mm | The thickness of the end knob. |
cylinder_center_offset | =knob_radius | Distance the cylinder center is offset from the top of the square. Knob_radius makes the knob flush with the top. |
knob_radius | =cylinder_radius * 2 | The radius of the knob. |
opening_width | =square_sides - opening_offset_knobside * 3 | The width of the opening for clipping. Makes the protrusion larger on the non-knob side for more stability with weight. |
opening_offset_knobside | 6mm | How much the opening is offset from the knob side. Larger makes the opening smaller. |
And for the rectangular_hanger.fcstd:
Parameter | default | changes |
|---|---|---|
side_depth | 66mm | The inner dimension for the "upper" and "lower" sides of the square. |
side_height | 14mm | The inner dimenstion for the "front" and "back" sides of the square. |
wall_width | 4,5mm | The width of the wall of the squares. |
square_height | 20mm | Height of the square walls (lying on it's side. |
cylinder_length | 50mm | The length of the stick for hanging stuff |
cylinder_radius | 5mm | The radius of the stick. Don't make it larger than (square_height-4mm)! Otherwise the cylinder plus chamfer qould protrude over the square. |
knob_thickness | 4,67mm | The thickness of the end knob. |
cylinder_center_offset | =knob_radius | Distance the cylinder center is offset from the top of the square. Knob_radius makes the knob flush with the top. |
knob_radius | =cylinder_radius * 2 | The radius of the knob. |
opening_width | =square_sides - opening_offset_knobside * 3 | The width of the opening for clipping. Makes the protrusion larger on the non-knob side for more stability with weight. |
opening_offset_knobside | 6mm | How much the opening is offset from the knob side. |