FRAMEWORK LAPTOP 12 NAS - 4x SATA drives - SFX PSU
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This NAS can run 4 sata drives and It's really compact thanks to the new framework laptop12 mainboard
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 162
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — NoDerivatives
This NAS mount an SFX power supply, 4 drives (3.5" or 2.5"), a laptop 12 mainboard, one 92mm fan and one 120mm fan. You can install an operating system like TRUENAS and keep this nas in every place due to his very compact design.
The cooling is optimal, 2 fans installed, one in the bottom and one in top position. Several holes in all the sides panel allow the natural airflow of the mainboard and PSU.
The I/O ports are in the bottom where you can connect 2 framework expansion cards. The other 2 usbc ports are inside because one need to be used as power connection.
To give power to the mainboard you can buy an usbc power board like this one https://www.amazon.it/JZK-Pezzi-Modulo-Trigger-lelettronica/dp/B0GX511DKH and connects 2 wires ( + and - ) from the 24pin psu connector, using the 12V line. Follow this scheme
Then with a usbC cable connect the power board to the laptop12 mainboard using one of the two usbC left inside the chassis.
To connect 4 sata drives you need this type of board https://www.amazon.it/WANGCL-Adattatore-Convertitore-Radiatore-Alluminio/dp/B0BVMC37SX In the M2 slot.
As main storage for the operating system you can mount a sata drive or use an usb pen drive connected in the other one usb C left inside the chassis.
All the pieces can be printed with a prusa Core ONE
PRINT SETTINGS:
ABS / PETG
4 outside lines
8% infill
supports only for PSU screw holes in the chassis and power button in the top
