Tensegrity Floating Table - Two Identical Halves
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The 'floating' table illusion: two identical halves held apart only by five strings. Flat plates, no supports.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 17
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
The 'floating' table illusion: two identical halves held apart only by five strings. Flat plates, no supports.
Print two plates and two arms; each arm plugs into its plate (0.2 mm fit)
The centre string holds the top up; four corner strings stop it tipping
106 mm tall, 90 × 70 mm top
You need fishing line or strong thread (about 1 m)
How it was checked
The two halves were intersected in CAD in the assembled position: no contact; arms and plates fit their slots with 0.2 mm.
Print settings
A1 mini, 0.20 mm, PLA, no supports: all four parts 1 h 10 min, 51 g. Tie the centre string first (about 16 mm free length), then the corners until the top is level.
Parametric source included (OpenSCAD or Python/build123d): change the values at the top of the file.
About this design
Checked in CAD before release (see above) and sliced in Bambu Studio. Pictures are 3D renders, not photos. This is a new design: makes and feedback are very welcome.
Español
Mesa de tensegridad («flotante»): dos mitades iguales unidas solo por hilos. Sin soportes, 1 h 10 min, 51 g.
العربية
طاولة التوازن المشدود «العائمة»: نصفان متطابقان يمسكهما الخيط فقط.