Strong and Sturdy Floorboard Pull Bar
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A strong floorboard or flooring pull bar to snap laminate, hardwood, or vinyl planks into place.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 41
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
My small town hardware store had no tools available for flooring installations, so I had to make my own! I remixed this model to make a stronger and stiffer tool that would last for multiple flooring projects. I printed the original out of PETG but had struggles with it breaking, or snapping along a layer seam.
For printing:
Print this using only PLA, it has superior stiffness against PETG or ABS and will transfer the force of the hammer more efficiently.
Print with 5 walls with a 0.6 mm nozzle, or 7 walls with a 0.4 mm nozzle. Use at least 40% infill. Target having the part weight around 250 grams.
(Trust me it will feel like a brick and the tool will last much longer.)
Use seam painting along the outside edge so the layer seam does not create a weak point in the part.
The part can print on its side with an outer brim for better bed adhesion.