1 / 2
Woom SNAP Mudguard Clip (Replacement Fender Mount) Fusion360 included — zdjęcie 1
1 / 2

Woom SNAP Mudguard Clip (Replacement Fender Mount) Fusion360 included

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Replacement clip for Woom SNAP click-on mudguards. Reuses the stock O-ring.

Ocena
0 / 5
Polubienia
0
Pobrania
1
Wydruki
0
Wyświetlenia
16
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Replacement clip for Woom 6 SNAP click-on mudguards (Schutzbleche).

One of the original clips on my kid's bike broke. I modeled this 1:1 replacement in Fusion 360.

Reuses the original rubber O-ring or anything that fits.

Print Settings & Recommendations

  • Orientation: Print it lying on its flat side.. Do not print it standing upright, or the prongs will snap along the layer lines the first time you clip it onto the fork/frame.

  • Material: PETG, ASA, or ABS. Avoid standard PLA — it deforms under constant tension (creep), doesn't like summer heat, and gets brittle outdoors.

  • Walls / Perimeters: 30 perimeters, for best stability

  • Layer Height: I used variable layer height

  • Supports: None needed when laid on its flat side

  • Use force and pressure to screw the cylindrical hole into the original metal thread of the metal rod. This will cut a thread into it, and it will hold perfectly.

Tested on a Woom 6 bike with the stock SNAP fender stays. Let me know in the comments if you need minor tweaks to tolerances.

Tagi