Woom SNAP Mudguard Clip (Replacement Fender Mount) Fusion360 included
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement clip for Woom SNAP click-on mudguards. Reuses the stock O-ring.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 1
- Makes
- 0
- Views
- 16
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
Replacement clip for Woom 6 SNAP click-on mudguards (Schutzbleche).
One of the original clips on my kid's bike broke. I modeled this 1:1 replacement in Fusion 360.
Reuses the original rubber O-ring or anything that fits.
Print Settings & Recommendations
Orientation: Print it lying on its flat side.. Do not print it standing upright, or the prongs will snap along the layer lines the first time you clip it onto the fork/frame.
Material: PETG, ASA, or ABS. Avoid standard PLA — it deforms under constant tension (creep), doesn't like summer heat, and gets brittle outdoors.
Walls / Perimeters: 30 perimeters, for best stability
Layer Height: I used variable layer height
Supports: None needed when laid on its flat side
Use force and pressure to screw the cylindrical hole into the original metal thread of the metal rod. This will cut a thread into it, and it will hold perfectly.
Tested on a Woom 6 bike with the stock SNAP fender stays. Let me know in the comments if you need minor tweaks to tolerances.