Workshop Angle Gauge: Drill 118°, Countersink 82/90°, Chisel 25/30°
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Flat gauge with V-notches of 25, 30, 45, 60, 82, 90, 118 and 135° to check drill tips, countersinks and chisels.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 16
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Flat gauge with V-notches of 25, 30, 45, 60, 82, 90, 118 and 135° to check drill tips, countersinks and chisels.
150 × 56 × 3 mm with a hanging hole
Numbers engraved next to each notch
Prints flat in half an hour
How it was checked
Checked with an overhang audit of the mesh and sliced in Bambu Studio: no supports needed.
Print settings
A1 mini, 0.20 mm, PLA, no supports: 29 min, 18 g.
Printed notches are accurate to about ±1°: good for checking, not for metrology.
Parametric OpenSCAD source included: change the values at the top of the file.
About this design
Designed in code and checked before release (see above); sliced in Bambu Studio. Pictures are 3D renders, not photos. This is a new design: makes and feedback are very welcome.
Español
Galga de ángulos de taller con muescas para brocas, avellanadores y formones. Sin soportes: 29 min, 18 g.
العربية
مقياس زوايا للورشة لرؤوس المثاقب والأزاميل.